890 907 Incoloy Seamless Pipe
video

890 907 Incoloy Seamless Pipe

Nickel-based alloy Incoloy 890 corrosion-resistant alloy is a completely austenitic nickel-iron-chromium alloy with added copper and molybdenum.
Send Inquiry
Chat Now

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Product Introduction

Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of 890 907 incoloy seamless pipe in China. If you're going to wholesale high quality 890 907 incoloy seamless pipe made in China, welcome to get free sample from our factory. Good service and reasonable price are available.

 

incoloy Products Application

890 907 incoloy Seamless Pipe video

1. Petrochemical industry: This alloy is used to manufacture pipelines, petrochemical equipment and containers in corrosive media environments.

2. Chemical industry: Alloy 907 is widely used in chemical equipment and reactors, and can effectively resist corrosion from various acid and alkali media.

3. Marine engineering: 907 alloy is used in offshore platforms, ships and offshore equipment due to its excellent corrosion resistance.

4. Medical equipment: Alloy 907 is used to manufacture anti-corrosion components in medical equipment, such as artificial joints and implants.

incoloy Material Specification

 

Properties Metric Imperial
Tensile strength 62 MPa 8990 psi
Yield strength 44 MPa 6380 psi
Elongation at break 46.50% 46.50%

890 907 incoloy Seamless Pipe

890 907 incoloy Seamless Pipe890 907 incoloy Seamless Pipe

Nickel-based alloy Incoloy 890 corrosion-resistant alloy is a completely austenitic nickel-iron-chromium alloy with added copper and molybdenum. Incoloy 890 is a general engineering alloy that is resistant to acid and alkali metal corrosion in both oxidizing and reducing environments. The high nickel content makes the alloy effectively resistant to stress corrosion cracking. It has good corrosion resistance in various media, such as sulfuric acid, phosphoric acid, nitric acid and organic acids, alkali metals such as sodium hydroxide, potassium hydroxide and hydrochloric acid solution.
GH907 is a low-expansion high-temperature alloy based on iron-nickel-cobalt. It is comprehensively strengthened with niobium, titanium, silicon and trace amounts of boron. It has high strength, low expansion coefficient and good thermal fatigue resistance below 650'C. properties and an almost constant elastic modulus. The Curie point (inflection point) is 400~450C. It is ferromagnetic below the Curie point and paramagnetic above the Curie point. This alloy is suitable for manufacturing various types of aero-engine ring parts and casings below 650C with controlled gap size, such as high-pressure compressor rear casings, load-bearing rings and heat insulation rings. The main products supplied are bars, forgings, plates and strips.

Customer Case

customer visit

890 907 incoloy Seamless Pipe

890 907 incoloy Seamless Pipe

FAQ

 

 

 

Q: Are you a factory or a trading company?
A: We are a professional manufacturer, and our company is also a very professional steel products trading company. We can offer a wide range of steel as well as super stainless steel products.

Q: What does your factory do in terms of quality control?
A: We have obtained ISO, CE and other certifications. From materials to products, we check every process to maintain good quality.

Q: Can I get a sample before ordering?
Answer: Yes, of course. Usually our samples are free. We can produce according to your samples or technical drawings.

Q: About the product price of 890 907 incoloy Seamless Pipe?
A: Due to cyclical changes in raw material prices, prices vary in different periods.

Hot Tags: 890 907 incoloy seamless pipe, China 890 907 incoloy seamless pipe suppliers, alloy for automotive, alloy products, alloy for biofabrication baths, alloy for electronics, alloy for fused deposition modeling baths, alloy for testing baths

Send Inquiry

whatsapp

Phone

E-mail

Inquiry