Nickel Alloy 20 ASTM B473 UNS N08020 Rod
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of nickel alloy 20 astm b473 uns n08020 rod in China. If you're going to wholesale high quality nickel alloy 20 astm b473 uns n08020 rod made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
Alloy 20 is austenitic stainless steel, which is highly resistant to corrosion and oxidation. The Alloy 20 Round Bar is made up of a chemical composition of chromium, molybdenum, copper, iron, nickel, and niobium, which helps stabilize the entire grade. These bars are available in sizes between 4mm to 350mm and lengths up to 3000mm.
They are widely used in pharmaceuticals, chemical industries, food processing, industrial fluid handling, petroleum refineries, etc. The ASTM B473 UNS N08020 Rod possesses superior strength. These rods are designed with a minimum tensile strength of 551Mpa and a minimum yield strength of 241Mpa.
| Material Specification | ASTM B473/ ASME SB473 Inco 20 |
|---|---|
| Grade | B473 UNS N08020 Round Bar |
| Form | Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc. |
| Size Range | 15NB to 150NB |
| Manufacturing Process | Cold drawn/ Extruded |
| Length | 100 mm To 3000 mm Long & Above |
| Diameter (Size) | Metric M6 to M48, Inches - 1/4'' to 2'' |
| Tolerance | H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients' requirements |
| Finish | Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished |
| Condition | Cold Drawn Polished, Cold Drawn Centreless Ground & Polished, Threading |
| Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
An Alloy 200 Square Bar is designed with a density of 8.1 g/cm3. These bars possess a melting point of about 1443 degrees C. They can be elongated by 30% and still possess excellent workability. DIN 2.4660 Flat Bar is used as support in various architectural and structural systems. These bars are available in different thicknesses and sizes. They are very durable and have a long service life. The Nickel Alloy 20 Hex bar shows good resistance against pitting and crevice corrosion in different mediums.
Hot Tags: nickel alloy 20 astm b473 uns n08020 rod, China nickel alloy 20 astm b473 uns n08020 rod suppliers, Cold Rolled Inconel 625 Alloy Seamless Pipe, Ni36CrTiAl Plate, Hastelloy C276 ROUND BAR, Nickel Alloy Coil B2, Monel 400 Alloy Steel Sheet, Hastelloy C 22 Alloy Steel Flange
You Might Also Like
Send Inquiry