Inconel600 Implementation Standard Inconel600 Characteristics Analysis
High-temperature alloy Inconel600 coil Inconel600 round bar UNSNO6600 seamless pipe High-temperature corrosion-resistant oxidation alloy with original factory warranty
Inconel600 characteristics and application areas overview:
This alloy is a nickel-chromium-iron based solid solution strengthened alloy with good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding performance, and has satisfactory thermal strength and high plasticity below 700°C. The alloy can be strengthened by cold working, and can also be connected by resistance welding, fusion welding or brazing. It is suitable for making oxidation-resistant parts that withstand low loads below 1100°C.
Incone l600 similar grades:
GH600 (China), NC15FE (France), W.Nr.2.4816, NiCr15Fe (Germany), NA14 (UK), NS312, UNSN06600, NCF600
Inconel 600 chemical composition table:
| Element | Minimum | Maximum | Unit |
|---|---|---|---|
| Nickel (Ni) | 72 | - | % |
| Cobalt (Co) | - | - | % |
| Chromium (Cr) | 14 | 17 | % |
| Iron (Fe) | 6 | 10 | % |
| Niobium (Nb) | - | 1.0 | % |
| Tantalum (Ta) | - | - | % |
| Carbon (C) | - | 0.15 | % |
| Manganese (Mn) | - | 1.0 | % |
| Silicon (Si) | - | 0.5 | % |
| Sulfur (S) | - | 0.015 | % |
| Phosphorus (P) | - | 0.04 | % |
| Copper (Cu) | - | 0.5 | % |
| Aluminum (Al) | - | 0.35 | % |
| Titanium (Ti) | - | 0.50 | % |
Physical Properties of Inconel 600:
| Property | Value | Unit |
|---|---|---|
| Density | 8.43 | g/cm³ |
| Melting Point | 1370-1430 | °C |
| Thermal Conductivity (at 100°C) | 12.85 | W/(m·°C) |
| Specific Heat Capacity | 435 | J/(kg·°C) |
| Elastic Modulus | 205 | GPa |
| Shear Modulus | 76 | GPa |
| Electrical Resistivity | 1.05 | μΩ·m |
| Poisson's Ratio | 0.34 | - |
| Coefficient of Thermal Expansion (20-100°C) | 12.35 | 10⁻⁶ °C⁻¹ |
Mechanical Properties of Inconel 600 (Minimum Values at 20°C):
| Property | Value | Unit |
|---|---|---|
| Heat Treatment | Solution Annealed | - |
| Tensile Strength (σb) | 585 | MPa |
| Yield Strength (σp0.2) | 240 | MPa |
| Elongation (δ5) | 30 | % |
| Brinell Hardness (HBS) | ≥217 | - |
Inconel600 Production Standards:
| Product Form | ASTM Standards | AMS Standards | ASME Standards |
|---|---|---|---|
| Bar | ASTM B166 | AMS 5665 | ASME SB166 |
| Forging | ASTM B166 | AMS 5665 | ASME SB166 |
| Plate/Strip | ASTM B168 ASTM B163 |
AMS 5540 | ASME SB168 ASME SB163 |
| Wire | ASTM B166 | AMS 5687 | ASME SB166 |
| Tube/Pipe | ASTM B167 ASTM B516 ASTM B517 |
AMS 5580 | ASME SB167 ASME SB516 ASME SB517 |
Inconel600 metallographic structure:
The alloy is treated at 1120℃ for 2h, and only TiN nitride and Cr7C3 carbide are present. After long-term aging at 870℃ and 1500℃, the organization still contains Cr7C3 and TiN, indicating that the organization of the alloy is stable.
Inconel600 process performance and requirements:
1. The alloy has good hot working performance, and the heating temperature of the ingot forging is 1110℃～1140℃.
2. The average grain size of the alloy is closely related to the deformation degree and final forging temperature of the forging.
3. The alloy has good welding performance and can be connected by various methods such as arc welding, argon arc welding, resistance welding and brazing. Large or complex welded structures should be annealed at 870℃ for 1h after fusion welding to eliminate welding stress.
4. The alloy must be machined after heat treatment. Due to the work hardening of the material, it is advisable to use a lower cutting speed and heavy feed than the processing of low-alloy standard austenitic stainless steel to machine under the cold-work hardened surface.
Inconel600 alloy welding uses AWS A5.14 welding wire ERNiCr-3 or AWS A5.11 welding rod ENiCrFe-3
Inconel600 application:
1. Thermocouple sleeves in corrosive atmosphere
2. Vinyl chloride monomer production: resistance to chlorine, hydrogen chloride, oxidation and carbonization corrosion
3. Uranium oxidation conversion to hexafluoride: resistance to hydrogen fluoride corrosion
4. Production and use of corrosive alkali metals, especially in environments using sulfides
5. Chlorine method for titanium dioxide
6. Production of organic or inorganic chlorides and fluorides: resistance to chlorine and fluorine corrosion
7. Nuclear reactors
8. Retorts and components in heat treatment furnaces, especially in carbonization and nitriding atmospheres
9. Catalytic regenerators in petrochemical production are recommended to use alloy 600 in applications above 700°C to obtain a longer service life.
Main specifications of Inconel600:
Inconel600 seamless pipe, Inconel600 steel plate, Inconel600 round steel, Inconel600 forging, Inconel600 flange, Inconel600 ring, Inconel600 welded pipe, Inconel600 steel strip, Inconel600 straight bar, Inconel600 wire and supporting welding materials, Inconel600 round cake, Inconel600 flat steel, Inconel600 hexagonal bar, Inconel600 reducer, Inconel600 elbow, Inconel600 tee, Inconel600 machined parts, Inconel600 bolts and nuts, Inconel600 fasteners.
