Monel Alloy 401 Seamless Pipe
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of monel alloy 401 seamless pipe in China. If you're going to wholesale high quality monel alloy 401 seamless pipe made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
Monel 401 Alloy copper-nickel alloy designed for specialized electrical and electronic applications. It has a very low temperature coefficient of resistance and medium-range electrical resistivity. Used for wire-wound precision resistors and bi-metal contacts. Monel 401 is higher in copper content than Monel 400 for better electrical properties.Monel 401 Alloy Machinability.
Mechanical Properties
| Unit | Value |
|---|---|
| Density | |
| lb/in.^3 | 0.321 |
| g/cm^3 | 8.91 |
| Thermal Expansion, in./in./°F x 10^-6 | |
| -320°-70°F (-196°-21°C) | 7 |
| 70°-200°F (21-93°C) | 7.6 |
| 70°-500°F (21-260°C) | 8.5 |
| 70°-1000°F (21-539°C) | 9.2 |
| 70°-1500°F (21-816°C) | 9.8 |
| 70°-2000°F (21-1093°C) | 10.6 |
| Thermal Conductivity | |
| Btu•in/hr/ft^2/°F at 70°F | 133 |
| W/m•°C | 21 |
| Electrical Resistivity | |
| ohm•circ mil/ft, at 70°F | 294 |
| μΩ•m | 0.498 |
| Temperature Coefficient of Resistance | |
| ppm/°C | ±20 |
| Curie Temperature | |
| °F | <-320 |
| °C | <-196 |
| Tensile Strength | |
| ksi | 64 |
| MPa | 441 |
| Yield Strength (0.2% Offset) | |
| ksi | 19.5 |
| MPa | 134 |
| Elongation | |
| % | 51 |
| Hardness | |
| HRB | 43 |
Hot Tags: monel alloy 401 seamless pipe, China monel alloy 401 seamless pipe suppliers, chloride resistant alloy, alloy development, alloy skill, dimensional stability alloy, alloy additives, alloy logistics
You Might Also Like
Send Inquiry