Inconel 600 Plate: Overview of Properties and Applications

Inconel 600 alloy plate is a high-performance nickel-chromium alloy known for its exceptional high-temperature strength, oxidation resistance up to 2000°F, and resistance to various corrosive media, particularly chloride stress corrosion cracking. Therefore, it is an ideal material for manufacturing furnace components, nuclear reactor components, chemical processing equipment (such as dichloroethane cracking units), and aerospace components that require durability in extreme high-temperature and corrosive environments, despite its relatively low thermal conductivity.

Is Inconel 600 magnetic?

Inconel 600 is non-magnetic and possesses excellent mechanical properties, combining high strength with good workability, and is easily welded. The cold-forming characteristics of the 600 alloy are similar to those of chromium-nickel stainless steel.

What is Inconel 600 plate?
Inconel 600 plate is a high-strength nickel-chromium alloy known for its heat resistance, corrosion resistance, and stress resistance. Gnee Steel supplies Inconel 600 plates designed for demanding environments. These plates have good tensile strength and maintain their shape even at high temperatures. Composed of approximately 72% nickel, 14-17% chromium, and a small amount of iron, it possesses excellent mechanical and physical properties, making it stable even under harsh conditions.

These plates are widely used in demanding industries such as aerospace, chemical processing, food processing, and heat treatment. It also performs reliably in petrochemical and power plants. Inconel 600 plates are resistant to corrosion, high temperatures, and high pressure, and are not easily damaged. They are used in furnace components, turbine blades, and heater components. The plates can be cold-rolled, hot-rolled, or precision-cut to meet specific requirements.

Specification of Inconel 600 Plate

Specification	ASTM B168 / ASME SB168
Sizes	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	0.1mm to 100 mm
Width	10-2500mm
Length	2m, 2.44m, 3m, or as required
Finish	Hot rolled plate (HR), Cold rolled Plate (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of	Plate, Coils, Foils, Rolls, Strip, Flats, Clad Plate, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Inconel 600 Profiling	To provide a full profiling service we use numerous profiling methods including: • Laser Plate Cutting • Plasma Plate Cutting • Oxy-propane Flame Cutting

Inconel 600 Sheet Price List

Product Description	Price in USD
Inconel 600 Sheet Price	$ 14.24 USD
Inconel 600 Sheet Price List	$ 15.87 USD
Inconel 600 Plate Price List	$ 14.71 USD
Inconel Alloy 600 Sheet Price	$ 6.11 USD
Price of Inconel 600 Plates	$ 7.87 USD
Inconel Alloy 600 Plate Price Today	$ 5.86 USD
Nickel Alloy 600 Plate Price List	$ 4.35 USD

Inconel 600 Plates Technical Data Sheet

DIMENSIONS

THICKNESS

WEIGHT CHART

Inconel 600 Plate Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS No.	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe

Inconel 600 Plate Chemical Composition

Grade	Carbon	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

Inconel 600 Plate Mechanical Properties

Element	Density	Melting Point	Tensile Stress	Yield Strength (0.2%Offset)	Elongation
Inconel 600	8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

Manufacturing process of Inconel 600 alloy sheets

Manufacturing process of Inconel 600 alloy sheets

Application industries of Inconel 600 plates

Chemical Equipment

Condensers

Heat Exchangers

Off-shore Oil Drillingcompanies

Petrochemicals

Pharmaceutical Equipment

Power Generation

Pulp and Paper industry

Sea Water Equipment

Inconel 600 Sheet Surface Finishes
#1 Inconel 600 Sheet – Hot rolled, annealed and descaled. Available in strip, foil and coil. Suitable for applications where a smooth, decorative surface is not required.
#2D Inconel 600 Sheet – Cold rolled, annealed and descaled, resulting in a matte finish. Used for deep drawing applications and parts requiring lubricant retention during forming.
#2B Inconel 600 Sheet – Cold rolled, annealed and descaled, resulting in a smooth finish. A light cold rolling pass with polishing rolls after annealing makes it brighter than the 2D finish.
#BA Inconel 600 Sheet - Bright annealed cold rolled and bright annealed.
#CBA Inconel 600 Sheet - Coarse bright annealed cold rolled matte surface and bright annealed.
#2 Inconel 600 Sheet - Cold rolled
#2BA Inconel 600 Sheet – Smooth surface formed after cold rolling and bright annealing. A light rolling pass with highly polished rolls results in a glossy surface. The 2BA finish is suitable for light forming applications where a glossy surface is required on the formed part.
Polishing - Various grit polishing treatments are available depending on specific surface finish requirements.

Why Choose Gnee as Your Nickel-Based Alloy Supplier

✅ Over 18 years of export experience, products sold to more than 80 countries

✅ Certified by ISO, SGS, and BV

✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars

✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging

✅ Fast delivery within 7-15 days, supported by global logistics partners

📦 Packaging and Shipping

All stainless steel products are packaged using the following methods:

Wooden pallets or crates

Moisture-proof packaging

Labels with furnace number, standard, and size labels

Shipped worldwide by sea, air, or express