Incoloy 907
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of incoloy 907 in China. If you're going to wholesale high quality incoloy 907 made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
INCOLOY® alloy 907 (UNS N19907) is a nickel-iron-cobalt alloy having high strength along with a low coefficient of thermal expansion. The alloy is strengthened by age-hardening heat treatments.
The combination of low expansion and high strength makes INCOLOY alloy 907 useful for gasturbine components. The low expansion enables closer control of clearances and tolerances for greater fuel efficiency. The high strength makes possible higher strength-to-density ratios for lower weight in aircraft engines. For those reasons, INCOLOY alloy 907 is used for gas-turbine seals, shafts, casings, and other structural parts.
The properties of INCOLOY alloy 907 are attractive for other applications including instrumentation, glass-to-metal sealing, ceramicmolding dies, and electricity generation.
Mechanical Properties
In the age-hardened condition, INCOLOY® alloy 907 has high mechanical properties. For example, when heat treated for optimum tensile properties, INCOLOY alloy 907 has yield and tensile strengths similar to those of INCONEL® alloy 718.
INCOLOY alloy 907 normally receives one of two heat treatments, depending on whether the strength requirements of the application are tensile limited or rupture limited. For tensile-limited applications, the age-hardening treatment is: 1325°F (720°C)/8 h, furnace cool at 100°F (55°C)/h to 1150°F (620°C)/8 h, air cool.
For rupture-limited applications, the treatment is: 1425°F (775°C)/12 h, furnace cool at 100°F (55°C)/h to 1150°F (620°C)/8 h, air cool.
Before either age-hardening treatment, the alloy is given a solution anneal of 1800°F (980°C)/1 h, air cool. Heat treatment of INCOLOY alloy 907 is covered by a U.S. patent.
Corrosion Resistance
INCOLOY alloy 907 contains no chromium because the presence of that element would increase thermal expansion. The absence of chromium, however, makes the alloy more susceptible to oxidation in high-temperature atmospheres. In some applications, INCOLOY alloy 907 may require a protective coating to prevent excessive oxidation. Figure 3 compares INCOLOY alloy 907 with INCONEL® alloy 718 (19% chromium) in a cyclic oxidation test at 1200°F (650°C).
A characteristic of INCOLOY alloy 907 is that unlike other alloys of comparable strength, it has good resistance to embrittlement in high-pressure hydrogen.
More +




Chemical Composition
Data Sheet
Physical Properties
| Density | g/cm3 | 8.33 | |
|---|---|---|---|
| lb/in.3 | 0.301 | ||
| Melting Range | °F | 2440 - 2550 | |
| °C | 1335 - 1400 | ||
| Curie Temperature | °F | 750 - 850 | |
| °C | 400 - 455 | ||
| Specific Heat | Btu/lb-°F | 0.103 | |
| J/kg-°C | 431 | ||
| Thermal Conductivity at 200°F (93°C) | Btu-in/ft2-h-°F | 108.5 | |
| W/m-°C | 15.6 | ||
| Electrical Resistivity | ohm circ mil/ft | 419 | |
| μΩ-m | 0.697 | ||
| Young's Modulus (70°F) | 103 ksi | 23.9 | |
| GPa | 165 | ||
| Shear Modulus (70°F) | 103 ksi | 8.8 | |
| GPa | 61 | ||
| Poisson's Ratio | 0.36 | ||
Mechanical Properties
| Temperature | Yield Strength (0.2% Offset) |
Tensile Strength | Elongation | Reduction of Area | |||
|---|---|---|---|---|---|---|---|
| °F | °C | ksi | MPa | ksi | MPa | % | % |
| Age hardened for tensile-limited applications | |||||||
| 70 | 20 | 162.5 | 1120 | 194.5 | 1341 | 15.0 | 36.5 |
| 800 | 427 | 142.4 | 982 | 168.3 | 1160 | 14.9 | 40.7 |
| 1000 | 538 | 137.5 | 948 | 164.3 | 1133 | 13.8 | 42.2 |
| 1200 | 649 | 126.2 | 870 | 151.2 | 1043 | 10.2 | 26.8 |
| 1400 | 760 | 82.0 | 565 | 93.9 | 647 | 20.9 | 52.0 |
| Age hardened for rupture-limited applications | |||||||
| 70 | 20 | 128.5 | 886 | 175.5 | 1210 | 16.0 | 25.0 |
| 800 | 427 | 105.1 | 725 | 154.8 | 1067 | 16.6 | 32.6 |
| 1000 | 538 | 105.5 | 727 | 150.2 | 1036 | 15.8 | 38.0 |
| 1200 | 649 | 98.7 | 681 | 136.5 | 941 | 19.8 | 42.2 |
| 1400 | 760 | 63.5 | 438 | 77.4 | 534 | 31.5 | 70.2 |
FAQ
Q: How do you control quality ?
A: Mill Test Certification is supplied with shipment, Third Party Inspection is available. and we also get ISO,SGS,Alibaba Verified.
Q: What are the advantages of your company ?
A: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.
Q: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, UK, Kuwait, Egypt, Turkey, Jordan,India, etc.
Q: Can you provide sample ?
A: Yes. We can provide the small samples in stock for free, as long as you contact us.Customized samples will take about 5-7 days.
Hot Tags: incoloy 907, China incoloy 907 suppliers, seamless alloy tube, alloy for waste treatment baths, incoloy material pipe alloy, alloy for pharmaceutical industry, alloy for directed energy deposition baths, alloy ss tube
Previous
Incoloy 908Next
Incoloy 903You Might Also Like
Send Inquiry















