Hiperco 50 Alloy Bar

Hiperco 50 is high saturation magnetic induction intensity, in the production of the same power of the motor, can greatly reduce the volume, in the electromagnet, in the same cross-sectional area can produce a large suction force. Because of the high Curie point, the alloy can work at higher temperatures where other soft magnetic materials have been completely demagnetized, and maintain good magnetic stability. Because of its large magnetostrictive coefficient, it is very suitable for magnetostrictive transducer with high output energy and high working efficiency. The alloy has a low resistivity (0.27μΩ·m) and is not suitable for use at high frequencies. The price is expensive, easy oxidation, poor processing performance, adding appropriate amount of nickel or other elements, can improve its processing.Hiperco 50 is used in motors and generators for achieving maximum torque density and minimum losses. It helps improve motor power density and efficiency, and can reduce the size of the motor. This alloy also offers the highest forces for actuators in consumer electronic applications, such as speaker, haptic, and sensor devices.

Common Trade Names:

Supermendur , Hiperco 50 , 1J22 , Permendur , Vacoflux 50 , 50KФ

Specifications：

GB／T15002 ASTM A-801, MIL-A-47182, MIL-S-1907, MIL-S-1949A, AMS A-47182

Key Properties:

• High magnetic saturation

• Low core loss compared to electrical steel

• Mechanical strength

Hiperco 50 Chemical Composition

Hiperco 50 Physical Properties

Hiperco 50 Mechanical Properties

Hiperco 50 Thermal Properties

Hiperco 50 Available Shape

Hiperco 50 Size Range

Bars & Rods & Foring Ring /Flanges

Sheet & Plate

Strip & Coil

Welding Wire &Spring wire

Seamless Tube & Welded Pipe

Process performance and requirements:

Hiperco 50 alloy can be processed into thin strips and filaments after rapid quenching at about 880℃. The strips and filaments can be flushed, wound or processed into components of various shapes.

Hiperco 50 alloy of hot rolling (forging), cold drawing and strip, cutting and grinding processing. When the alloy is machined into components and subjected to a final heat treatment of slow cooling, plasticity is poor and can only be lightly ground.

Hiperco 50 ApplicationsI

Common and superconducting magnets electromagnet pole heads,

Small power transformer,

Choke coil,

The core of a magnetic amplifier,

Aeromotor

The rotor and stator of the generator,

Telephone vibrating plate,

Magnetostrictive transducer

The vibrator of an ultrasonic generator

Aviation power transformer

FAQ

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 50% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.or negotiable