Stainless Steel Grade 301 Steel Strip
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of stainless steel grade 301 steel strip in China. If you're going to wholesale high quality stainless steel grade 301 steel strip made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard, and full hard.
Good resistance in applications involving external exposure to mildly corrosive conditions at ambient temperatures. Resists outdoor, industrial, marine, and mild chemical environments, susceptible to carbide precipitation during welding, which restricts its use in some applications. Similar to resistance of Stainless Steel grade 304
Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C).
Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure
Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C).
Solution Treatment (Annealing) – Heat to 1010-1120°C and cool rapidly.
Use low side of range for intermediate annealing.
This grade cannot be hardened by thermal treatment.
| Category | Details |
|---|---|
| Grade | 301 Stainless Steel |
| Standards | ASTM A240, JIS G4304, EN 10088-2 |
| Thickness Range | 0.1mm - 3.0mm |
| Width Range | 10mm - 1240mm |
| Length | Coil or Customized Lengths |
| Finish Types | 2B, BA, No. 4, HL, No. 1, Mirror, Satin |
| Temper | Annealed, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard |
| Edge Condition | Slit Edge, Mill Edge |
| Application | Springs, washers, clips, automotive trim, conveyor belts, fasteners, and architectural applications |
| Processing | Slitting, Cut-to-Length, Shearing, Polishing |
| Packaging | Standard export packaging or as per customer requirements |
| Certification | Mill Test Certificate as per EN 10204/3.1 |
| Surface Protection | PVC Coating, Paper Interleaved |
hardens at high rate, creating a very high strength from cold rolling and from roll forming.
more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
strain-hardened austenitite steel undergoes partial transformation into martensitite steel during this process.
severe cold deformation can still occur, due to residual ductility.
Grade 301 becomes strongly magnetic when cold rolled.
must be annealed for maximum corrosion resistance
more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
must be annealed for maximum corrosion resistance
Welding and post weld annealing will both remove high strength induced by prior cold rolling.
Spot welding is commonly used to assemble cold rolled 301 components..
material will lose temper in the heat affected weld zone.
Hot Tags: stainless steel grade 301 steel strip, China stainless steel grade 301 steel strip suppliers, , , incoloy seamless pipe, alloy piping, high-temperature alloy
You Might Also Like
Send Inquiry