Nov 20, 2024
Leave a message
Nondestructive Testing of Nickel-Based Alloys 200
Nondestructive Testing of Nickel-Based Alloys 200
Alloys 200 Mechanical Properties
| Tensile Strength |
380 MPa (55,000 psi) minimum |
| Yield Strength |
105 MPa (15,000 psi) minimum |
| Elongation |
30% minimum (in 2-inch gauge length) |
| Hardness |
HRB 45-70 (Typical) |
Nickel Alloys 200 Physical Properties
| Density |
8.89 g/cm³ |
| Melting Range |
1446°C (2635°F) |
| Thermal Conductivity |
70.2 W/m·K (at 20°C) |
| Electrical Resistivity |
9.6 μΩ·m (at 20°C) |
| Modulus of Elasticity |
204 GPa (29.6 x 10^6 psi) |
Nickel 200 Chemical Composition (% By Weight)
| Element |
Min |
Max |
| Ni |
99 |
- |
| Fe |
- |
0.4 |
| Mn |
- |
0.35 |
| C |
- |
0.15 |
| Cu |
- |
0.25 |
| Si |
- |
0.35 |
| S |
- |
0.01 |
