Monel400 material composition Monel400 physical and mechanical properties
Monel 400 alloy (UNS N04400 or MCu-28-1.5-1.8 or Ni68Cu28Fe) is a kind of alloy that can be used in seawater, chemical solvents, ammonia sulfur chloride, hydrogen chloride, various acidic media such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acids , a nickel-based alloy material with good corrosion resistance in alkaline media, salt and molten salt.
Chinese name
Monel 400 alloy
heat conduction
21.8 W/m-K
melting point
1300 - 1350°C


Magnetism
200H(At 70F)
Introduction
Monel 400 alloy also has good mechanical properties, a wide range of use temperatures from low to high temperatures, good welding properties and medium and high strength.
application
Monel 400 is mainly used in chemical and petrochemical industries, as well as marine development and other fields. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc.
Implementation standards
ASTM B 164 (rods, wires), ASTM B 564 (forgings), ASTM B 127 (plates, strips), ASTM B 165 (seamless pipes).
processing
The alloy can be machined using the same methods as traditional iron-based materials. Use water coolant when adding high speed machines. The material shrinks during processing, so attention should be paid to the processing shrinkage allowance to ensure dimensional accuracy.
welding
Monel 400 has good welding performance and can use TIG and MIG methods. It can use Monel body or EniCu-7 wire and electrode; or manual arc welding and submerged arc welding; it can be welded with carbon steel and low alloy steel.





