Feb 05, 2025 Leave a message

How Much Does Incoloy Alloy Cost per Ton? Price Factors by Grade

Why There Is No Single Price for Incoloy Alloy

Incoloy is the common family name for a group of nickel-iron-chromium alloys used for high-temperature service and for chloride-bearing corrosive service. Incoloy 800 and 800H (UNS N08800 and N08810), Incoloy 825 (UNS N08825) and Incoloy 925 (UNS N09925) are separate grades with separate chemistries, separate melting routes and separate heat-treatment cycles. A mill therefore cannot quote one price per ton for the family; it quotes a price for a grade, a product form, a size and a quantity.

Commercial quotations in this market are normally built from two components. The first is a conversion charge that covers melting, casting, hot working, cold drawing or rolling where applicable, heat treatment, straightening, cutting, testing and packing. The second is an alloy surcharge that tracks the raw-material basket, recalculated every month or every quarter against published nickel, chromium, molybdenum, copper and iron quotations. When the nickel index moves, every Incoloy price in the market moves with it within one pricing period.

Indicative Price Ranges by Grade

The table below gives indicative 2025 order-of-magnitude ranges for mill quantities, expressed in US dollars per tonne. They are planning figures only, and they shift with the metal indices and with the product form.

Grade UNS Composition that drives cost Indicative range, USD per tonne
Incoloy 800 / 800H N08800 / N08810 Ni 30.0 - 35.0, Cr 19.0 - 23.0, Fe balance 15,000 - 25,000
Incoloy 825 N08825 Ni 38.0 - 46.0, Cr 19.5 - 23.5, Mo 2.5 - 3.5, Cu 1.5 - 3.0, Ti 0.6 - 1.2 25,000 - 35,000
Incoloy 925 N09925 Ni 42.0 - 46.0, Cr 19.5 - 22.5, Mo 2.5 - 3.5, Cu 1.5 - 3.0, Ti 1.9 - 2.4 30,000 - 40,000

The same three grades bought as a single plate, as a short cut length, or as a small-diameter seamless tube will sit at the top of the range or above it, because the fixed costs of melting, testing and packing are spread over far less weight. Plate and bar sit lower; seamless cold-drawn tube carries the largest conversion premium of all, and heavy-wall or very small-diameter tube carries more still.

What Actually Drives the Price

Nickel content is the single largest lever. Nickel accounts for roughly 30 to 46 percent by weight across these grades, and it is the most volatile of the constituent metals, so a grade with a higher minimum nickel level is inherently more exposed to index movement. Molybdenum and copper come next: Incoloy 825 and 925 both contain 2.5 to 3.5 percent molybdenum and 1.5 to 3.0 percent copper, neither of which appears in Incoloy 800, and that alone explains a large part of the gap in the table above.

Process route is the second lever. Incoloy 800 and 800H are supplied as annealed product. Incoloy 925 is a precipitation-hardening alloy: it requires a solution anneal followed by an ageing treatment, an extra furnace cycle with its own quality controls, and it is generally specified with tighter mechanical property guarantees. That extra processing is a real cost line, not a marketing premium.

The remaining variables that a buyer should expect to be asked about are purchase quantity, delivery date, certification level, and destination. A 20-tonne order attracts a different conversion charge from a 500 kg order. Urgent delivery usually means air freight or a premium slot in the rolling schedule. Certification with third-party witnessing or with a specific inspection regime adds cost. Freight, insurance and import duty can add a substantial percentage on international shipments, and they vary widely by route.

Product Forms and the Standards Behind Them

Because the form changes the price so much, it helps to name the specification when comparing quotations. Incoloy 800 plate, sheet and strip is ordered to ASTM B409 / ASME SB-409, seamless tube and pipe to ASTM B407 / ASME SB-407 and bar to ASTM B408. Incoloy 825 follows ASTM B424 for plate, sheet and strip, ASTM B423 / ASME SB-423 for seamless pipe and tube and ASTM B425 for bar. Incoloy 925 bar and forging stock is covered by ASTM B805. All of the nickel-iron-chromium grades also appear in the general seamless tube specification ASTM B163. Naming the specification and the condition removes most of the ambiguity from a price comparison.

How to Compare Quotations Properly

First, compare like with like on form, size, wall thickness and condition; a quotation for annealed plate and a quotation for cold-drawn tube are not comparable numbers. Second, ask whether the price is based on actual weight or theoretical weight, because the difference on tube and bar can exceed five percent. Third, ask which tests are included: chemical analysis, tensile and yield testing, hardness, intergranular corrosion testing, ultrasonic or eddy-current examination and dimensional inspection are frequently quoted as extras. Fourth, confirm the certification type, for example an EN 10204 type 3.1 inspection certificate issued by the manufacturer or a type 3.2 certificate countersigned by an independent inspector. Fifth, lock the alloy surcharge mechanism in writing so that the price at delivery reflects the agreed index and the agreed validity period rather than an arbitrary revision.

Frequently Asked Questions

Q: What is the approximate price of Incoloy 800 per ton?
A: Indicative 2025 mill ranges are roughly 15,000 to 25,000 USD per tonne. Small quantities, seamless tube and heavy-wall sizes will price above that band, and the whole band moves with the nickel index.

Q: Why is Incoloy 825 more expensive than Incoloy 800?
A: Incoloy 825 contains 38.0 - 46.0 percent nickel against 30.0 - 35.0 percent in Incoloy 800, plus 2.5 - 3.5 percent molybdenum and 1.5 - 3.0 percent copper, all of which raise the raw-material cost.

Q: Why does Incoloy 925 carry the highest price of the three?
A: It combines the highest nickel range of the group with molybdenum, copper and 1.9 - 2.4 percent titanium, and it must be solution annealed and age hardened, which adds a second furnace cycle and additional testing.

Q: How much does the product form affect the price per ton?
A: Considerably. Plate and bar sit at the low end of the range, seamless cold-drawn tube at the high end, because drawing and dimensional control are the most expensive conversion steps.

Q: Are the published price ranges fixed?
A: No. They are indicative planning figures. Alloy surcharges are recalculated monthly or quarterly against published metal quotations, so a firm price is normally valid for a stated period only.

Q: Which certificates should accompany an Incoloy shipment?
A: At minimum a mill test certificate showing heat number, chemical analysis and mechanical results, with the applicable ASTM or ASME specification named. Independent inspection certificates are available on request and are priced separately.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry