What Is 253MA Steel?
253MA is a high-temperature austenitic alloy steel with a nominal composition based on iron with about 20-22% chromium, 10-12% nickel, silicon, and small additions of rare earth elements such as cerium. It is designated UNS S30815 in the ASTM system and is widely used where oxidation resistance and elevated-temperature strength are required. The combination of silicon and rare earth additions gives 253MA an oxide scale that adheres tightly at high temperature, which is the key to its long service life in furnace and heat-treatment atmospheres.
High-Temperature Performance
253MA offers excellent resistance to oxidation and maintains useful strength and toughness at temperatures up to about 1150°C. It performs well in oxidizing, reducing and mixed atmospheres across a service range of roughly 450-1150°C, and resists attack by chlorides, sulfides and alkaline environments better than many conventional austenitic stainless steels. Its low thermal expansion coefficient and good creep properties help maintain dimensional stability in cyclic thermal service, reducing the risk of deformation and cracking in furnace equipment.
Heat Treatment
253MA is supplied in the solution-annealed condition, typically around 1050-1150°C followed by rapid cooling, which puts the alloying elements into solid solution and restores optimum mechanical properties. In practice, the material is selected for service in the annealed condition; further aging treatments are not part of normal supply for this grade. Any hot forming should be followed by solution annealing to restore corrosion and oxidation resistance, and welding should use matching high-temperature filler metal.
Fabrication and Welding
253MA can be formed by hot rolling, cold rolling, forging and bending, and has good weldability using conventional arc welding processes with appropriate filler. Because the grade is designed for high-temperature service, welding procedures should control heat input and interpass temperature to avoid sensitization, and the weld area should be cleaned of heat tint before service. The material's plasticity makes it suitable for complex engineering designs such as furnace liners, grates and tube supports.
Typical Applications
253MA is used in high-temperature equipment in the petroleum, chemical and power industries: furnace grates, radiant tubes, burners, heat exchangers and combustion chambers. It also appears in petrochemical reformers, electric boiler components, and in aerospace and marine systems where high-temperature components such as burner parts and exhaust systems are exposed to oxidizing atmospheres. Food processing and medical equipment benefit from its corrosion resistance in specific high-temperature applications.
Selection Guidance
Choose 253MA when service temperatures exceed the useful range of standard 304/316 stainless steel and oxidation or sulfidation resistance is the governing requirement, but a nickel-based alloy is not justified by cost. For temperatures above about 900°C with mechanical loading, compare 253MA against heat-resistant nickel alloys such as Incoloy 800H; the final choice depends on creep requirements, atmosphere composition and lifecycle cost. Always confirm the exact grade designation, such as UNS S30815, and the governing standard with the supplier.
FAQ
Q: What is the maximum service temperature of 253MA?
A: 253MA maintains good strength and oxidation resistance at temperatures up to about 1150°C in suitable atmospheres, with a practical continuous service range of roughly 450-1150°C.
Q: What is the UNS designation of 253MA?
A: 253MA corresponds to UNS S30815 in the ASTM designation system.
Q: Is 253MA an austenitic stainless steel?
A: Yes. It belongs to the austenitic stainless steel family and combines high chromium and nickel with silicon and rare earth additions for high-temperature performance.
Q: Can 253MA be welded?
A: Yes, it has good weldability using conventional arc welding processes with matching high-temperature filler metal and controlled heat input.
Q: How is 253MA different from 310S stainless steel?
A: 253MA uses silicon and rare earth elements to form a more protective oxide scale, giving better cyclic oxidation resistance and higher allowable stress in some services, with lower nickel content than 310S.
Q: Where is 253MA commonly used?
A: In furnaces, heat exchangers, burners, radiant tubes, petrochemical reformers, exhaust systems and other high-temperature equipment in the power, chemical, petroleum and marine industries.





