Inconel 625 Round Bar
video

Inconel 625 Round Bar

Available Formats
GNEE Group offers Nickel Alloy Inconel 625 in a variety of forms, including:
Bars
Sheets
Forgings
Tubes
Flanges
Seamless and Welded Pipes
Welding Rods

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Product Introduction

Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of inconel 625 round bar in China. If you're going to wholesale high quality inconel 625 round bar made in China, welcome to get free sample from our factory. Good service and reasonable price are available.

 

Inconel 625 Round Bar introduce

Inconel 625 Round Bar

Inconel 625 Round BarInconel 625 Round Bar

Inconel 625 round bars are designed with round cross-sectional areas. These bars consist of high contents of nickel, chromium and molybdenum. The highly resistant bars work well at cryogenic temperatures and at elevated temperatures up to 1800 degrees Fahrenheit. The versatile bars have excellent strength. They have a minimum tensile strength of 930 MPa and a yield strength of 517 MPa. The strong modules can be easily elongated by 42.5% in the system. The bars are designed in standard lengths ranging from 100mm to 300mm or more and can be processed with polished, bright, matte or turned surfaces. The dimensions and schedules of this grade comply with EN, AISI, JIS, BS, DIN, ASTM and ASME standards.

Inconel 625 Round Bar Specification

Inconel 625 Material Specification: ASTM B446/ ASME SB446 Inco 625

Grade: Inconel 600 (UNS N06600, Alloy 600, 2.4816), Inconel 601 (UNS N06601, Alloy 601, 2.4851), ASTM B446 Inconel 625 (UNS N06625, Alloy 625, 2.4856), Inconel 800 (UNS N08800, Alloy 800, 1.4876)

Form: Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc.

Size Range: 15NB to 150NB In manufacturing process: Cold drawn/ Extruded

Length: 100 mm To 3000 mm Long & Above

Diameter (Size) : Metric M6 to M48, Inches - 1/4'' to 2''

Tolerance : H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients' requirements

Finish : Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished

Condition : Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Threading

Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline

Inconel 625 Round Bar Chemical Structure

Grade C Mn Si S Cu Fe Ni Cr
Inconel 625 0.10 max 0.50 max 0.50 max 0.015max – 5.0 max 58.0 min 20.0 – 23.0

Mechanical Properties Chart Alloy 625 Round Bar

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Equivalent grades of Inconel UNS N06625 Round Bar

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4MNiCr22Mo9Nb NiCr23Fe

GNEE Group Factory Environment

Inconel 625 Round Bar

Inconel 625 Round Bar

GNEE Group Product Packaging

Inconel 625 Round Bar

Inconel 625 Round Bar

FAQ

Q: Can I get samples before order ?

A: Yes, of course.We can produce by your samples or technical drawings ;

Q: Can I go to your factory to visit?

A: Of course, we welcome customers from all over the world to visit our factory ;

Q: What kind of work does your company do?

A: Our company is a professional manufacturer.We mainly produces stainless steel sheet, stainless steel coil, stainless steel pipe, stainless steel bars and so on.

Hot Tags: Inconel 625 Round Bar, China Inconel 625 Round Bar suppliers, inconel alloy fuel system parts, inconel alloy actuator parts, inconel alloy tee fittings, inconel alloy blow molding process, Inconel 825 Astm Standard, 706 602ca Inconel Alloy Pipe

Send Inquiry

whatsapp

Phone

E-mail

Inquiry