S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of s355j2+n 10*1500*3000mm 1.0577 steel plate hot rolled products of structural steel en 10025-2 3.1 certificate in China. If you're going to wholesale high quality s355j2+n 10*1500*3000mm 1.0577 steel plate hot rolled products of structural steel en 10025-2 3.1 certificate made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products Of Structural Steel EN 10025-2 3.1 Certificate
Description
| Width: | 600-2500mm | Grade: | S355J2+N |
|---|---|---|---|
| Technique: | Hot Rolled | Type: | Steel Plate |
| Standard: | ASTM,AISI,JIS,DIN | Length: | 1000-12000mm |
| Special Use: | High-strength Steel Plate | Thickness: | 6-100mm |
| Product Name: | High Quality S355J2+N Hot Rolled Carbon Steel Plate | Shape: | Flat Steel Plate |
| High Light: |
10mm Hot Rolled Carbon Steel Plate,1.0577 Hot Rolled Carbon Steel Sheet,S355J2+N Hot Rolled Mild Steel Sheet |
||
S355J2+N 10*1500*3000mm 1.0577 Steel Plate Hot Rolled Products of Structural Steel EN 10025-2 3.1 Certificate
S355J2 Steel (Material 1.0577)
S355J2 steel (1.0577) is a quality grade of S355 steel, which is one of the non-alloy structural steels commonly used in Europe. According to EN 10025-2: Hot rolled products of structural steels, S355 steel is divided into 4 quality grades, namely:
S355JR (1.0045),
S355J0 (1.0553),
S355J2 (1.0577), former names: S355J2G3 and S355J2G4 in EN 10025:1990,
S355K2 (1.0596), previous names: S355K2G3 and S355K2G4 in EN 10025:1990.
EN 10025 S355J2 equivalent ASTM A992/A992M; Australian AS/NZS 3678: Grade 350 L20; Canadian G40.20/G40.21: 350WT (55WT); Chinese GB/T 1591: Q355D; and Indian standard IS 2062: E350.
EN 10025 S355J2 Meaning
S355J2 Meaning: "S" stands for "Structural steel"; 355 indicates that the material has a minimum yield strength of 355 MPa when the nominal thickness is ≤ 16mm; and "J2" indicates that the material has a minimum impact energy of 27J at -20°C (-4 °F).
S355J2 Steel Properties
S355J2 steel properties are listed in the datasheet below, including chemical composition, physical and mechanical properties, etc.
Chemical Composition
Chemical composition based on heat analysis.
| Chemical Composition, % (≤) | |||||||||
| Standard | Steel (Material Number) | C | Si | Mn | P | S | Cu | N | Method of deoxidation |
| EN 10025-2 | S355J2 (1.0577) | 0.20 | 0.55 | 1.60 | 0.025 | 0.025 | 0.55 | – | Fully killed |
Note: For carbon content (C) and nominal thickness (t)
C ≤ 0.20 % when t ≤ 16mm,
C ≤ 0.22 % when t > 30 mm,
C by agreement when sections with nominal thickness > 100 mm.
For long products the P and S content can be 0.005 % higher.
| Chemical Composition (Product Analysis), % (≤) | |||||||||
| Standard | Steel (Material Number) | C | Si | Mn | P | S | Cu | N | Method of deoxidation |
| EN 10025-2 | S355J2 (1.0577) | 0.23 | 0.6 | 1.70 | 0.035 | 0.035 | 0.60 | – | Fully killed |
Note: For carbon content (C) and nominal thickness (t)
C ≤ 0.23 % when t ≤ 16mm,
C ≤ 0.24 % when t > 30 mm,
C by agreement when sections with nominal thickness > 100 mm.
For long products the P and S content can be 0.005 % higher.
Mechanical Properties
S355J2 mechanical properties at room temperature are listed in the datasheet below, including tensile strength, yield strength, and elongation, etc.
| Yield Strength, Mpa, ≥ | |||||||||
| Steel Grade (Steel Number) | t≤16 | 16< t ≤40 | 40< t ≤63 | 63< t ≤80 | 80< t ≤100 | 100< t ≤150 | 150< t ≤200 | 200< t ≤250 | 250< t ≤400 |
| S355J2 (1.0577) | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 | 265 |
| Tensile Strength, Mpa, ≥ | |||
| Steel Grade (Material Number) | t<3 | 3 ≤ t ≤ 100 | 100 < t ≤400 |
| S355J2 (1.0577) | 510-680 | 470-630 | 450-600 |
Note:
1 MPa = 1 N/mm2
t = Nominal Thickness (mm)
Hot Tags: s355j2+n 10*1500*3000mm 1.0577 steel plate hot rolled products of structural steel en 10025-2 3.1 certificate, China s355j2+n 10*1500*3000mm 1.0577 steel plate hot rolled products of structural steel en 10025-2 3.1 certificate suppliers, 420 Stainless H type Steel, 304 316 Steel Flat Bars With Holes, 304 304L 316 316L Stainless Round Bar, Stainless Steel 446 Round Bar, Stainless Steel 310S Round Bar
You Might Also Like
Send Inquiry