Is INCONEL stronger than stainless steel?
Stainless Steel
Stainless steels are characterized by a chromium content higher than 10.5% by weight. There are five classes of stainless steels:
Austenitic
Ferritic
Martensitic
Duplex
Precipitation Hardenable
These stainless steels are named after the microstructure that forms in those alloys. Duplex stainless steel is a mix of austenitic and ferritic microstructures, and precipitation hardening means that precipitates can form to increase the strength of those class of stainless steels. The strength and the corrosion resistance of the stainless steel is dependent on these microstructures. For example, austenitic stainless steels are going to be the most ductile class of stainless steel, but also the most corrosion resistant. On the other hand, the martensitic class has typically much higher strength, but less corrosion resistance. Austenitic stainless steels have a larger more equiaxed grain structure which is what gives it these properties compared to the smaller lathe structure found in martensitic stainless steels.


All stainless steels have a higher corrosion resistance than traditional steels and can be found in everything from kitchen cutlery and structural building applications to biomedical and food preparation applications.
Inconel vs Stainless Steel: What's the Difference?
For one thing, Inconel is much more expensive than stainless steel alloys. Inconel also has much better corrosion resistance and strength at high temperatures. However, at lower temperatures, steels like 17-4PH stainless will have a higher strength than Inconel. When deciding between the two different alloys, the main deciding factor is cost, temperature, and strength. If a lower cost, but relatively strong part is required, stainless steel is probably the way to go. If an air-critical component is required with high temperature needs, then Inconel is a much better alloy for that application.





