Dec 22, 2025 Leave a message

inconel 718 vs Grade 2 titanium

When sourcing materials for corrosion-resistant, high-performance components, procurement teams often compare Inconel 718 and Grade 2 titanium alloy. Although these two materials appear similar on the surface, their intended applications are quite different:
Inconel 718: Suitable for high-strength, high-temperature, load-bearing applications; Grade 2 titanium alloy: Suitable for lightweight, corrosion-resistant, medium-strength applications.

Choosing the wrong material can lead to: over-engineering and excessive costs, structural failure at high temperatures, unnecessary weight increase, or reduced service life.

 

 

What is titanium grade 2 material?

Titanium Grade 2 (Ti Grade 2) is a widely used, commercially pure (CP) titanium known for its excellent corrosion resistance, good strength-to-weight ratio, formability, and weldability, making it a versatile "workhorse" material in chemical processing, marine, medical, and aerospace industries for components like heat exchangers, pipes, tanks, and implants.

 

What type of material is Inconel 718?

Inconel 718 is a high-strength, nickel-chromium superalloy, primarily composed of Nickel (50-55%), Chromium (17-21%), Iron (balance), Niobium (4.75-5.5%), Molybdenum (2.8-3.3%), Titanium (0.65-1.15%), and Aluminum (0.2-0.8%), with trace elements like Cobalt, Carbon, Manganese, Sulfur, and Silicon. Its unique blend provides excellent strength, corrosion resistance, and weldability, making it crucial for aerospace, gas turbines, and high-temperature parts.

 

Inconel 718 vs. Grade 2 Titanium: Key Differences

 

Inconel 718 vs. Grade 2 Titanium: Standards

Material UNS Number Common Standards Core Design Purpose
Inconel 718 N07718 ASTM B637, AMS 5662 / 5663 Extreme strength & fatigue resistance
Titanium Grade 2 R50400 ASTM B265 / B348 Corrosion resistance & lightweight design

 

Inconel 718 vs. Grade 2 Titanium: Chemical Composition Comparison (wt.%)

Element Inconel 718 Titanium Grade 2 Buyer Impact
Nickel (Ni) 50–55 - High-temperature stability
Chromium (Cr) 17–21 - Oxidation resistance
Iron (Fe) Balance (≤18) ≤0.30 Cost & strength
Niobium (Nb) 4.75–5.50 - Precipitation strengthening
Molybdenum (Mo) 2.8–3.3 - Creep & corrosion resistance
Titanium (Ti) ≤1.15 Balance (≥99.2) Lightweight corrosion resistance

 

Inconel 718 vs. Grade 2 Titanium:  Mechanical Properties Comparison (Room Temperature)

Property Inconel 718 (Aged) Titanium Grade 2
Yield Strength (0.2%) ≥1,000 MPa ~275 MPa
Tensile Strength 1,250–1,450 MPa ~345 MPa
Elongation 12–20% ~20–30%
Hardness 36–45 HRC ~160 HB

 

Inconel 718 vs. Grade 2 Titanium:  Density & Strength

Material Density (g/cm³) Strength-to-Weight
Inconel 718 ~8.19 Very high absolute strength
Titanium Grade 2 ~4.51 Excellent weight efficiency

 

Inconel 718 suppliers

 

At GNEE, Inconel 718 is available in various forms to meet diverse industrial needs:
Plates and Sheets (cold rolled and hot rolled)
Bars and Rods (round, square, hexagonal)
Tubes (seamless and welded)
Wires and Strips (for springs, fasteners, electrical applications)
Forgings and Custom Parts (according to drawings or specifications)
Specifications: UNS NO7718, WNR 2.4668, AFNOR NC19FeNb, JIS NCF 718, GOST ХН75МБТЮ, EURONORM NiCr22Mo9Nb, OR ЭИ602, BS NA 21.
Temperature Range: -423°F to 1300°F.
Testing and Documentation: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Testing Reports, Non-Destructive Testing Reports, PMI Test Reports, Visual Inspection Reports, Third-Party Inspection Reports, NABL Certified Laboratory Reports.
Packaging: Wooden crates, bubble wrap, steel strapping, or packaged according to customer requirements.

Inconel 718 round bar
Inconel 718 round bar
Inconel 718 round pipe
Inconel 718 round pipe
Inconel 718 alloy plate
Inconel 718 alloy plate
Inconel 718 spring
Inconel 718 sprin

Send Inquiry

whatsapp

Phone

E-mail

Inquiry