Why Price per Kilogram Is Only the Starting Point
Engineers and buyers comparing Inconel 625 and Inconel 718 often start with the unit price of bar, plate or tube stock. While useful, the per-kilogram figure reflects only raw material and basic processing. The total cost of a component also depends on heat treatment requirements, machining difficulty, welding behavior, rejection risk and delivery time. Understanding these drivers prevents over-specification and helps control project budgets without compromising reliability.
What Drives the Raw Material Price Difference
Inconel 625 (UNS N06625) contains roughly 58% minimum nickel, 20-23% chromium and 8-10% molybdenum, with niobium for solid-solution strengthening. Inconel 718 (UNS N07718) contains about 50-55% nickel, 17-21% chromium and 2.8-3.3% molybdenum, plus 4.75-5.5% niobium and titanium-aluminum additions for precipitation hardening. Because nickel and molybdenum are the most expensive alloying elements, the higher nickel and molybdenum content of 625 generally gives it a higher raw material cost. Market comparisons in recent years have typically placed Inconel 625 about 10-25% above Inconel 718 per kilogram in wholesale trade, although the gap narrows or widens with nickel price movements and order volume.
Processing Cost: The Hidden Difference
Inconel 718 relies on a precipitation-hardening heat treatment to develop its high strength, so bar and forgings must pass through solution treatment, aging and often additional thermal cycles with tight control. Its rapid work-hardening behavior also increases machining cost and tool wear. Inconel 625, by contrast, is strengthened in the annealed condition without a mandatory aging step; it is easier to machine, weld and form, and it is more often available from stock. The practical result is that 718 carries a higher processing cost per part, which partially offsets its lower raw material price in fabricated components.
Total Cost of Ownership: Which Alloy Is More Economical
For corrosion-critical service - seawater systems, chemical processing, flue gas handling and subsea equipment - Inconel 625 offers a lower total cost in many projects because fabrication is simpler and the alloy tolerates welding without post-weld heat treatment. For high-strength rotating and load-bearing parts operating below about 650 °C, such as gas turbine disks and high-strength fasteners, Inconel 718 delivers the required mechanical performance and usually remains the more economical choice despite its higher processing cost. The correct comparison is therefore application-based rather than price-based.
Market Trends and Procurement Tips
Nickel price fluctuations affect both alloys, while the tight supply of aerospace-grade 718 makes it more sensitive to volatility. Strong aerospace demand keeps 718 pricing firm, while the oil, gas and offshore sectors continue to favor 625 for its corrosion performance. Buyers can stabilize budgets by confirming the governing specification - ASTM B166 or ASME SB166 for 718, and ASTM B443, B444 or B446 for 625 - and by requesting EN 10204 3.1 material certificates, PMI verification and dimensional inspection reports with every order. Evaluating whether the design really requires precipitation-hardened strength can also reveal opportunities to substitute 625 and save material and processing costs.
FAQ
Q: Is Inconel 625 more expensive than Inconel 718?
A: On raw material cost, usually yes, because 625 carries more nickel and molybdenum. However, 718 adds costly heat treatment and machining steps, so total fabricated cost depends on the product form and application.
Q: Why do price quotes vary so much between suppliers?
A: Quoted prices differ with product form - bar, plate, pipe or forgings - as well as size, quantity, surface finish, certification level and current nickel market prices.
Q: Which alloy gives lower total cost for a seawater system?
A: Inconel 625 generally provides a lower total cost for corrosion-critical seawater and chemical service because it needs no aging treatment and welds more easily.
Q: When should I pay the premium for Inconel 718?
A: Choose 718 when the design demands high yield strength, fatigue resistance and creep-rupture strength at temperatures up to about 650 °C, typically in turbine and high-stress bolting applications.
Q: How can I protect my budget from nickel price swings?
A: Lock in pricing for confirmed orders, consider stocking standard sizes, and obtain pricing with the specification and certificate requirements defined up front so suppliers compete on the same basis.





