Comparison of the corrosion performance of Alloy 20 and Hastelloy C276

Comparison of the corrosion performance of Alloy 20 and Hastelloy C276
Alloy 20 offers advantages such as cost-effectiveness and excellent resistance to sulfuric acid (below 150°F) and chloride stress corrosion cracking. Hastelloy C276, on the other hand, provides superior and broader corrosion resistance in highly corrosive, mixed acid, chloride-rich, and high-temperature environments (both oxidizing and reducing conditions), handling demanding conditions that Alloy 20 cannot, but at a higher cost. C276 delivers unparalleled performance in critical applications such as chemical processing, pollution control, and oil and gas, exhibiting superior resistance to pitting, crevice corrosion, and stress corrosion cracking compared to Alloy 20 in harsh environments.
When to use Hastelloy C276?
These pipes are commonly used in applications involving strong acids (such as sulfuric acid, hydrochloric acid, and phosphoric acid). Hastelloy C276 tubing can withstand the highly corrosive nature of these acids, making it suitable for components in equipment such as chemical reactors, distillation columns, heat exchangers, and scrubbers.

C276 Alloy
C276 alloy is a low-carbon nickel-chromium-molybdenum alloy that provides excellent corrosion resistance, pitting resistance, and crack resistance even under harsh conditions. It also exhibits excellent corrosion resistance to sulfuric acid, hydrochloric acid, and phosphoric acid. The chromium content helps resist oxidizing agents such as copper chloride and ferric chloride, while the tungsten content contributes to improved overall corrosion resistance.
Therefore, C276 alloy is particularly suitable for harsh environments in industries such as petrochemicals, energy production, and pharmaceuticals, for example, environments containing chloride ions, chlorine dioxide, organic acids, and seawater.
Alloy 20
Alloy 20 is an austenitic nickel alloy designed to provide high levels of resistance to sulfuric and nitric acid corrosion, making it ideal for power generation, pharmaceutical, and food processing applications. It offers good corrosion resistance and resistance to chloride stress corrosion cracking, as well as good wear and impact resistance. The maximum operating temperature for Alloy 20 is 986°F/530°C.
The performance of Alloy 20 is similar to that of 316 stainless steel. In chloride-rich environments, it is sometimes used as a substitute for stainless steel – because Alloy 20 has better resistance to chloride stress corrosion cracking than 316 stainless steel.
Chemical Composition of Alloy 20 vs Hastelloy C-276
| Element | Alloy 20 (UNS N08020) Content (%) | Hastelloy C-276 (UNS N10276) Content (%) |
|---|---|---|
| Nickel | 32.0 - 38.0 | 57.0 min (Balance) |
| Chromium | 19.0 - 21.0 | 14.5 - 16.5 |
| Molybdenum | 2.0 - 3.0 | 15.0 - 17.0 |
| Iron | ≥ 35.0 | 4.0 - 7.0 |
| Copper | 3.0 - 4.0 | - |
| Tungsten | - | 3.0 - 4.5 |
| Cobalt | - | 2.5 max |
| Manganese | ≤ 2.0 | 1.0 max |
| Silicon | ≤ 1.0 | 0.08 max |
| Carbon | ≤ 0.07 | 0.01 max |
| Phosphorus | ≤ 0.045 | 0.04 max |
| Sulfur | ≤ 0.035 | 0.03 max |
| Vanadium | - | 0.35 max |
| Niobium | 8 × %C - 1.00 max | - |
Corrosion Resistance Comparison
Sulfuric Acid
Alloy 20 is specifically designed for sulfuric acid environments. At moderate temperatures, it performs exceptionally well in sulfuric acid solutions up to approximately 60% concentration. It is a cost-effective solution in applications where sulfuric acid corrosion is the primary concern.
While Hastelloy C276 is resistant to sulfuric acid corrosion, it is not optimized for sulfuric acid environments. In sulfuric acid environments where Alloy 20 is suitable, Hastelloy C276 is generally considered overkill and too expensive.
Hydrochloric Acid
Hastelloy C276 is one of the few alloys capable of resisting hydrochloric acid corrosion over a wide range of concentrations and temperatures. Alloy 20 is not recommended for hydrochloric acid environments due to its susceptibility to rapid corrosion.
Chloride Environments
Alloy 20 has good resistance to chloride stress corrosion cracking, but it is susceptible to pitting corrosion in high-concentration chloride solutions.
Hastelloy C276 provides excellent resistance to pitting and crevice corrosion, even under highly corrosive chloride conditions.
Mixed Chemical Environments
Alloy 20 is effective in moderately oxidizing and reducing environments, but it is not suitable for strong oxidizing agents such as nitric acid.
Hastelloy C276 performs well in both oxidizing and reducing environments, making it a more versatile choice for mixed chemical environment applications.
Strength and Machinability
Both Alloy 20 and Hastelloy C276 have good mechanical strength at room temperature. Alloy 20 generally has a slightly higher yield strength. Hastelloy C276 retains its properties better at elevated temperatures.
In terms of processing, Alloy 20 is easier to machine. It can be welded using standard welding processes and typically does not require post-weld heat treatment. Hastelloy C276 can also be welded, but requires more care, and post-weld cleaning is usually necessary to maintain its corrosion resistance.
Why Choose Gnee as Your Nickel-Based Alloy Supplier
✅ Over 18 years of export experience, products sold to more than 80 countries
✅ Certified by ISO, SGS, and BV
✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars
✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging
✅ Fast delivery within 7-15 days, supported by global logistics partners
📦 Packaging and Shipping
All stainless steel products are packaged using the following methods:
Wooden pallets or crates
Moisture-proof packaging
Labels with furnace number, standard, and size labels
Shipped worldwide by sea, air, or express

About Gnee Steel
Gnee Steel is a professional manufacturer of nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H/HT, Incoloy 825, Monel 400, Monel K500, and other high-temperature alloy materials. We specialize in the production and sales of alloy materials. Gnee Steel's products are widely used in aerospace, chemical, power generation, automotive, nuclear energy, and other fields, and we can provide customized alloy material solutions according to customer needs. For inquiries about alloy material prices or customized alloy material solutions, please feel free to contact us via email at ss@gneemetal.com for a quote.
Square Meters Built
Enterprise Employees
Years Experience
Partner countries





