Nov 28, 2025 Leave a message

Datasheet-For-Inconel-600-1-7-(1)-1-6.pdf

nickel alloy UNS N06600 vs nickel alloy UNS N06625: Composition, Properties and Applications Compared

Both nickel alloy UNS N06600 and nickel alloy UNS N06625 are nickel-chromium alloys, but they are engineered for different jobs. nickel alloy UNS N06625 carries higher chromium plus 8-10% molybdenum, giving it superior strength and corrosion resistance in harsh chemical and marine service. nickel alloy UNS N06600 offers a higher temperature ceiling with lower cost, making it the economical choice for general high-temperature applications with moderate corrosion requirements.

Key Takeaways

nickel alloy UNS N06625: Ni ≥58%, Cr 20-23%, Mo 8-10%; nickel alloy UNS N06600: Ni ≥72%, Cr 14-17%, no molybdenum.

625 resists reducing acids and pitting far better; 600 reaches 1093 °C versus 982 °C for 625.

625 is stronger, especially at room temperature; 600 is more economical.

Use 625 for chemical, marine and aerospace; 600 for furnace and heat-treatment service.

Chemical Composition

nickel alloy UNS N06600 (UNS N06600, W.Nr. 2.4816) contains chromium 14.0-17.0% and nickel 72.0% minimum. nickel alloy UNS N06625 (UNS N06625, W.Nr. 2.4856) contains chromium 20.0-23.0%, nickel 58.0% minimum, cobalt up to 1.0% and molybdenum 8.0-10.0%. The molybdenum addition is the defining difference: it gives 625 reduction resistance that 600 does not possess, while the higher chromium of 625 improves oxidation resistance.

Corrosion Resistance

Nickel-based alloys owe their corrosion resistance to the presence of nickel, and both 600 and 625 demonstrate this fully. Because alloy 625 contains a higher proportion of chromium, it exhibits superior oxidation resistance. Because alloy 600 contains no molybdenum while alloy 625 contains over 8%, alloy 625 demonstrates superior overall corrosion resistance, particularly against reducing acids, pitting and crevice corrosion in chloride media.

Mechanical and Physical Properties

Density is similar: 8.47 g/cm³ for 600 and 8.44 g/cm³ for 625. Melting range differs notably: 1354-1413 °C for 600 versus 1290-1350 °C for 625. Magnetic permeability is near unity for both, and the Curie temperature is -124 °C for 600 and below -196 °C for 625. In service, alloy 625 offers higher strength, particularly at room temperature, while alloy 600 retains useful strength to a higher temperature ceiling of about 1093 °C.

Standards and Applications

nickel alloy UNS N06600 (AMS 5540) is a nickel-chromium alloy designed for low- and high-temperature environments up to 2000 °F, used in distillation kettles, muffle furnaces, roller hearths and heat-treatment applications. nickel alloy UNS N06625 operates from low temperatures to 1800 °F and serves aerospace components, chemical processing equipment, heat exchangers, marine and petrochemical applications. Both are produced to the relevant ASTM B/ASME SB specifications for plates, pipes, bars and forgings.

Selection Guidance

Choose nickel alloy UNS N06625 when service involves strong acids, chlorides, pitting environments or high mechanical loads, and when the operating temperature stays below 982 °C. Choose nickel alloy UNS N06600 when the requirement is high-temperature oxidation resistance up to 1093 °C, when corrosion demands are less stringent, and when cost control matters.

Frequently Asked Questions

Which alloy is stronger, 600 or 625? nickel alloy UNS N06625, whose molybdenum and higher chromium content deliver superior strength, especially at room temperature.

Which alloy resists reducing acids better? nickel alloy UNS N06625, whose 8-10% molybdenum provides reduction resistance that 600 lacks.

Which alloy has a higher temperature limit? nickel alloy UNS N06600, rated to about 2000 °F versus 1800 °F for 625.

Is nickel alloy UNS N06600 cheaper than 625? Yes, the lower chromium and molybdenum content make 600 the more economical choice.

Are 600 and 625 interchangeable? No. The molybdenum-bearing 625 handles reducing acids and chlorides that 600 cannot.

What are the UNS numbers? nickel alloy UNS N06600 is UNS N06600 (W.Nr. 2.4816); nickel alloy UNS N06625 is UNS N06625 (W.Nr. 2.4856).

Send Inquiry

whatsapp

Phone

E-mail

Inquiry