Inconel X-750 plates
Characteristics and uses of Inconel X-750 plates
Inconel X-750 plates are known for their high strength, corrosion resistance, and ability to maintain these properties at high temperatures. They are commonly used in the aerospace, nuclear, and chemical processing industries for applications that require resistance to high temperatures, stresses, and corrosion.
What are INCONEL X-750 Plates used for?
INCONEL X750 alloy plates are widely used in rocket engine thrust chambers. Airframe applications include thrust reversers and hot air duct systems. Large pressure vessels are made from INCONEL X-750 alloy. Other applications include heat treating fixtures, forming tools, extrusion dies, and test machine fixtures.
Is Inconel X-750 alloy magnetic?
It is similar to Inconel 600 but with the addition of aluminum and titanium, and can be classified as a PH alloy. It has good resistance to general corrosion and oxidation. X-750 alloy is non-magnetic and is resistant to a wide range of industrial corrosives under both reducing and oxidizing conditions.
What is the difference between Inconel 718 and Inconel 750?
Inconel X-750 is a nickel-chromium alloy that is precipitation hardened by the addition of Al and Ti and has creep rupture strength at elevated temperatures up to approximately 700°C (1290°F). INCONEL 718 alloy (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel-chromium material that can be used in temperatures from -423°F to 1300°F.
Chemical Composition Of Inconel X750 Plates
| Grade | Ni | Cr | Al | C | Mn | Ti | Cu | Si | S |
|---|---|---|---|---|---|---|---|---|---|
| Inconel X750 | 70.0 min | 14.0 – 17.0 | 0.40 – 1.0 | .08 max | 1.00 max | 2.25 – 2.75 | 0.50 max | .50 max | .01 max |
Inconel X750 Plates, Sheets & Coils Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.28 g/cm3 | 1430°C | 1267 MPa | 868 MPa | 25 % |
Inconel X750 Plate, Sheet & Strips Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Inconel X750 | 2.4669 | N07750 |
Inconel X750 Sheets & Plate Dimenisons
|
Surface finish |
Thickness (mm) |
Width (mm) |
|---|---|---|
|
2B – Cold rolled, heat treated, pickled, skin passed |
0.25–8.0 |
max. 2032 |
|
2D – Cold rolled, heat treated, pickled |
0.4–6.35 |
max. 1524 |
|
2E – Cold rolled, heat treated, mechanically descaled |
0.4–8.0 |
max. 2032 |
|
2R – Cold rolled, bright annealed |
0.25–3.5 |
max. 1524 |
|
2H – Work hardened |
0.4–6.35 |
max. 1524 |
|
Polished, brushed |
0.5–4.0 |
max. 1524 |
Characteristics
Inconel X-750 plates offer many advantages over other materials such as stainless steel and titanium. This nickel-chromium alloy offers excellent strength and corrosion resistance, making it ideal for harsh environments. It also resists oxidation, making it ideal for high-temperature applications. These plates are ideal for engineering components that require strength and durability.
Gnee Steel is a supplier of Inconel X-750 Plates, including tubes: Seamless tubes: Sizes: 4 - 219 mm; Thickness: 0.5 - 20 mm; Welded tubes: Sizes: 5.0 - 1219.2 mm; Thickness: 0.5 - 20 mm, Plates: Plate thickness 0.1 to 100 mm; Plate width 10-2500 mm, Strips, Alloy round bar sizes: diameter 3-800 mm;, Flat bar sizes: thickness 2-100 mm; Width: 10-500 mm, Hexagonal bar sizes: 2-100 mm;, Wire and extruded profiles. We work with steel mills to provide customers with 625 alloy that meets or exceeds many leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN and BS standards.
Gnee Steel stocks and sells Inconel X-750 Plates, Tubes, Pipes, Sheets, Strips, Plates, Round Bars, Flat Bars, Forged Billets, Hexagons, Wires and Extruded Profiles. Feel free to contact us for a quote at ss@gneesteel.com
