Why C-276 Is a Special Purchase
Alloy C-276 (UNS N10276), commonly known as Hastelloy C-276, is a nickel-chromium-molybdenum alloy with tungsten that offers outstanding resistance to pitting, crevice corrosion and stress corrosion cracking in both oxidizing and reducing media. Because it is a premium material used in critical chemical, petrochemical, marine and pollution-control equipment, the buying process should focus on specification compliance, traceability and quality assurance rather than price alone.
1. Which Standard Does the Sheet Conform To?
Ask the supplier to confirm the governing specification. For plate, sheet and strip, ASTM B575/ASME SB575 is the primary standard for C-276; related product forms include B622 (seamless pipe and tube), B619/B626 (welded pipe), B366 (fittings), B574 (bar) and B564 (forgings). A supplier who cannot name the standard cannot demonstrate compliance.
2. Can You Provide a Material Test Certificate?
A full material test certificate (MTC) should show the heat number, chemical composition, mechanical properties and the test results for each lot. Verify that the composition matches the limits of the specification, including nickel balance, chromium 14.5-16.5%, molybdenum 15.0-17.0% and tungsten 3.0-4.5%, and confirm the tensile, yield and elongation values.
3. What Thickness, Width and Surface Condition Do You Need?
C-276 sheet is available in a range of thicknesses, typically from thin gauge sheet up to heavy plate. Clarify the required thickness tolerance, width, edge condition (slit or sheared), and surface finish such as hot-rolled annealed and pickled, cold-rolled annealed, or abrasive-blasted. Surface condition affects fabrication and corrosion performance, especially for weld preparation.
4. How Will the Material Be Formed and Welded?
C-276 is ductile and can be formed with conventional equipment, but it work-hardens, so the sequence of operations should be planned to minimize work hardening. Welding is performed with matching nickel-based filler such as ERNiCrMo-4, and no post-weld heat treatment is normally required, provided heat tint is removed. Ask the fabricator how they will control heat input and interpass temperature to preserve corrosion resistance.
5. What Are the Key Corrosion Resistance Expectations?
C-276 performs well in both oxidizing and reducing environments, including sulfuric acid, hydrochloric acid, acetic acid and phosphoric acid, and is one of the few materials that resist wet chlorine, hypochlorite and chlorine dioxide solutions. Ask the supplier for corrosion data relevant to your specific media, temperature and concentration, because performance always depends on the actual service conditions.
6. How Do You Verify Quality and Traceability?
Confirm that each sheet is marked with the heat number and grade, that certificates are issued by an accredited mill or third-party inspection body, and that the supplier can trace every piece back to the original mill heat. For critical projects, third-party inspection and positive material identification (PMI) are standard practice.
7. What Is the Lead Time and Packing Arrangement?
Ask about stock availability, cutting or shearing services, and packaging suitable for export, such as wooden crates, moisture-proof wrapping and edge protection. Confirm the delivery terms and what documentation is included with the shipment.
FAQ
Q: Is Inconel C-276 the correct name for this alloy?
A: No. C-276 is a grade in the Hastelloy family of nickel alloys (UNS N10276). The name Inconel C-276 is a common misnomer; the correct trade designation is Hastelloy C-276 or simply Alloy C-276.
Q: What standard covers C-276 sheet and plate?
A: ASTM B575/ASME SB575 is the governing specification for nickel alloy plate, sheet and strip, including UNS N10276.
Q: Does C-276 need post-weld heat treatment?
A: In most services, no. The as-welded condition retains adequate corrosion resistance when a matching filler is used and heat tint is removed after welding.
Q: What makes C-276 different from 316 stainless steel?
A: C-276 is a nickel-based alloy with much higher resistance to pitting, crevice corrosion, stress corrosion cracking and aggressive acids, at a significantly higher cost than stainless steel.
Q: Can C-276 sheet be cold formed?
A: Yes. C-276 is ductile and can be formed using conventional techniques, but its work-hardening rate must be considered when planning bending, rolling or deep drawing operations.
Q: What documents should I request with a C-276 order?
A: Request the material test certificate, mill certificate of compliance, and any third-party inspection reports, plus PMI results if required by your project specification.





