May 15, 2026 Leave a message

AMS 5662 / AMS 5663 GH4169 Brightening And Polishing Rods

 
 
 
AMS 5662 / AMS 5663 GH4169 Brightening and Polishing Rods
AMS 5662 / AMS 5663 GH4169 Brightening And Polishing Rods
01.

AMS 5662 / AMS 5663 GH4169 Brightening and Polishing Rods

AMS 5662 and AMS 5663 represent different heat treatment states of GH4169 (a Chinese-made alloy, equivalent to Inconel 718 or UNS N07718), a precipitation-hardening nickel-chromium superalloy. These bars are typically finished with a "bright" (bright machining or grinding) surface treatment and are generally used in high-strength aerospace fasteners and turbine components.

02.

What is AMS 5662 material?

Inconel 718 nickel alloy

Inconel 718 nickel alloy - AMS 5662 - UNS N07718. Nickel alloy 718, commonly known as Inconel 718, is a precipitation-hardening, corrosion-resistant, and heat-resistant nickel alloy, available in various forms including bars, forgings, plates, and sheets.

AMS 5662 Material

 

1.AMS 5662 and ASM 5663 GH4169 Rod Specifications Overview

Parameter AMS 5662 AMS 5663
Material GH4169 (UNS N07718 / Inconel 718) GH4169 (UNS N07718 / Inconel 718)
Specification Title Nickel Alloy Bars, Forgings, and Rings Nickel Alloy Bars, Forgings, and Rings (Alternative Heat Treatment)
Material Type Wrought Nickel-based Superalloy Wrought Nickel-based Superalloy
Strengthening Mechanism γ″ + γ′ precipitation hardening γ″ + γ′ precipitation hardening
Product Forms Bar, forging, ring Bar, forging, ring
Typical Applications High-strength fasteners, turbine discs, shafts High-temperature fasteners, turbine discs, springs, seals

 

2. Chemical composition (weight percentage) of AMS 5662 and ASM 5663 GH4169

Element Content (%) AMS Requirement Function
Nickel (Ni) 50.0 – 55.0 50.0 – 55.0 Matrix element; high-temperature stability
Chromium (Cr) 17.0 – 21.0 17.0 – 21.0 Oxidation and corrosion resistance
Iron (Fe) Balance (~18-20) Balance Fe-Ni-Cr base alloy
Niobium (Nb) 4.75 – 5.50 4.75 – 5.50 Core strengthening element – forms γ″ phase
Molybdenum (Mo) 2.80 – 3.30 2.80 – 3.30 Solid-solution strengthening; creep resistance
Titanium (Ti) 0.65 – 1.15 0.65 – 1.15 Forms γ′ strengthening phase
Aluminum (Al) 0.20 – 0.80 0.20 – 0.80 Forms γ′ strengthening phase; improves oxidation resistance
Carbon (C) ≤ 0.08 ≤ 0.08 Low carbon for toughness
Manganese (Mn) ≤ 0.35 ≤ 0.35 Deoxidizer
Silicon (Si) ≤ 0.35 ≤ 0.35 Deoxidizer
Phosphorus (P) ≤ 0.015 ≤ 0.015 Ensures toughness
Sulfur (S) ≤ 0.015 ≤ 0.015 Ensures hot workability
Boron (B) 0.002 – 0.006 0.002 – 0.006 Grain boundary strengthener
Cobalt (Co) ≤ 1.00 ≤ 1.00 Residual element
Copper (Cu) ≤ 0.30 ≤ 0.30 Residual element

 

3. Physical properties of AMS 5662 and ASM 5663 GH4169

Property Value Significance
Density 8.19 g/cm³ (0.296 lb/in³) Weight calculation
Melting Range 1260 – 1336°C (2300-2440°F) Fire resistance margin
Thermal Conductivity (20°C) 11.4 W/m·K Heat dissipation
CTE (20-100°C) 13.0 × 10⁻⁶/°C Fitting compatibility
Specific Heat (20°C) 435 J/kg·K Thermal capacity
Modulus of Elasticity (20°C) ~200 GPa Stiffness
Electrical Resistivity 1.25 µΩ·m –
Magnetic Properties Slightly magnetic –

Click to download the GH4169 alloy PDF file now

 

4. Material Specifications (GH4169 / Alloy 718)

AMS 5662 (Solution Annealed): This is the softest state, commonly used for manufacturing parts requiring machining or forming. It has good ductility and can be further hardened.

AMS 5663 (Precipitation Hardened): This is the fully heat-treated state (solution + aging). It provides maximum tensile strength and creep rupture strength at high temperatures.

Bright/Finish Finish: These bars are typically produced in a "bright" finish to indicate their excellent surface finish (smooth, clean, usually achieved through centerless grinding), reducing the need for subsequent machining.

Properties: These alloys exhibit excellent fatigue resistance, oxidation resistance up to 1000°C, and excellent corrosion resistance.

 

5. Common applications of GH4169

Aerospace: Gas turbine engine components, housings, and fasteners;
Marine: Marine technology;
Energy: Nuclear reactors and components.

Gas turbine engine components
Gas turbine engine components
Marine industry
Marine industry
Nuclear reactor components
Nuclear reactor components

 

6. GH4169 Selection Recommendations

Requirement Recommended Specification
General high-strength aerospace components AMS 5662
High-temperature fasteners AMS 5663
Springs and seals AMS 5663
Turbine discs and shafts Either (verify design requirements)
When higher temperature capability is needed AMS 5663
Default / most common specification AMS 5662

 

Why Choose Gnee as Your Nickel-Based Alloy Supplier

As a Tier-1 Manufacturer, we provide more than just raw material; we provide total quality transparency:

✅️VIM + VAR melting: Ensures zero internal inclusions, preventing "hard spots" that break tools.

✅️MTC 3.1 Traceability: Full heat-analysis and mechanical property verification documented with every batch.

✅️Global Compliance: Materials are fully compliant with UNS N07718, ASTM B637, and international aviation codes.

✅️Fast Global Shipping: We maintain a large inventory of 5.0mm to 50.0mm bright rods for immediate dispatch.

pc205877858-gh4169unsn07718inconel718hightemperaturealloyroundrodblackandbrightsurface

Gnee Alloy GH4169(inconel 718) Certificate

 

📦 Packaging and Shipping

All Nickel Based Alloy products are packaged using the following methods:

Wooden pallets or crates

Moisture-proof packaging

Labels with furnace number, standard, and size labels

Shipped worldwide by sea, air, or express

about us

 Gnee Alloy GH4169 Product Packing

Contact us for the latest export price quote for GH4169 Alloy

 

FAQ

 

Q1: Will your h9 tolerance rods work in a Citizen or Star Swiss lathe?
A: Yes. Our rods are specifically centerless ground to meet the exacting requirements of Swiss-type automatic lathes. The extreme straightness and tight tolerances ensure zero bar-feeder interference and zero vibration at high RPM.

 

Q2: Why is AMS 5662 better for my machine shop than AMS 5663?
A: Starting with AMS 5662 (Solution Treated) means you are cutting a much softer material. This significantly extends your CNC tool life and reduces machining time. You then perform the final 16-hour aging cycle on the nearly finished parts to reach the required high strength.

 

Q3: Is your GH4169 interchangeable with Inconel 718 bright rods?
A: Absolutely. GH4169 is the technische designation used in international blueprints for UNS N07718. They share the same chemical DNA and respond identically to heat treatment.

 

Q4: Do you offer trial orders for small batch fasteners?
A: Yes. We support R&D and prototype production by offering Flexible MOQs for all in-stock bright ground rods.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry