Inconel 718 686 Thick wall Pipe
GNEE Group offers Nickel Alloy Inconel 718 686 in a variety of forms, including:
Bars
Wires
Sheets
Forgings
Tubes
Flanges
Seamless and Welded Pipes
Welding Rods
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of inconel 718 686 thick wall pipe in China. If you're going to wholesale high quality inconel 718 686 thick wall pipe made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
Inconel 718 686 Thick wall Pipe introduce
Inconel 718 Seamless Tubes, Stockholder of ASTM B163 Inconel 718 Tube, 718 Inconel Santiary Tube, Inconel 718 Cold Rolled Coiled Tube, 718 Inconel Tubing, 718 Inconel Heat exchanger Tube, ASTM B516 Inconel 718 Welded Tubing, ASTM B670 Inconel Alloy 718 Welded Round Pipes Stockholders, Inconel 718 Welded Tubes Stockist, Inconel 718 Oval Tubes, Alloy 718 ERW Tubes Supplier, Inconel Tube, 718 Inconel Welded Tubes Suppliers and Exporters in China
Inconel alloy 686 is a single-phase, austenitic Ni-Cr-Mo-W alloy offering outstanding corrosion-resistance in a range of severe environments. Its high nickel (Ni) and molybdenum (Mo) provide good resistance in reducing conditions, and high chromium (Cr) offers resistance to oxidizing media. Molybdenum (Mo) and tungsten (W) aid resistance to localized corrosion such as pitting. Iron (Fe) is closely controlled to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected zones of welded joints. Resistance to general, pitting and crevice corrosion increases with the alloying (Cr+Mo+W) content, and INCONEL alloy 686 scores higher than competitive materials.
Inconel 718 686 Thick wall Pipe


Inconel 718 Seamless Tube
Size (OD): .375" through 1" OD
Wall Thickness : .035" through .065"
Inconel 718 Welded Tube
Size (OD): .125" OD through 1" OD
Wall Thickness : .035" through .109" wall
718 Inconel Alloy Tube Chemical Composition
|
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
||
|
Inconel 718 |
|
0.35 max |
0.35 max |
0.015max |
0.30 max |
– |
50.00 – 55.00 |
17.00 – 21.00 |
Inconel 686 Chemical Composition
| % | Ni | Cr | Mo | W | Ti | Fe | C | Mn | S | Si | P |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | Balance | 19 | 15 | 3 | 0.02 | – | – | – | – | – | – |
| Max | Balance | 23 | 17 | 4.4 | 0.25 | 1 | 0.01 | 0.75 | 0.02 | 0.08 | 0.04 |
686 Alloy Tube Chemical Composition
| Element | Content (%) |
|---|---|
| Iron, Fe | Balance |
| Chromium, Cr | 24-26 |
| Nickel, Ni | 21-23 |
| Molybdenum, Mo | 2-2.50 |
| Manganese, Mn | ≤ 2 |
| Nitrogen, N | 0.10-0.16 |
| Silicon, Si | ≤ 0.70 |
| Phosphorous, P | 0.025 |
| Carbon, C | ≤ 0.020 |
| Sulfur, S | ≤ 0.010 |
Inconel Alloy 718 Tubes Specifications
|
Specifications |
: |
ASTM B163, B516 / ASME SB163, B516 |
|
Dimensions |
: |
ASTM, ASME and API |
|
Alloy 718 Tubes Size |
: |
6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
|
Schedule |
: |
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
|
Type |
: |
Seamless / ERW / Welded / Fabricated / LSAW Tubes |
|
Form |
: |
Round, Square, Rectangular, Hydraulic Etc |
|
Length |
: |
Single Random, Double Random & Cut Length. |
|
End |
: |
Plain End, Beveled End, Treaded |
Specification of Inconel 686 Tubes
Specifications : ASTM B704 / ASME SB704
Dimension Standard : ANSI B36.19M, ANSI B36.10
Tube Range : 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk.
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCp0, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated / LSAW Tubes
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded
718 686 stainless steel Pipe


GNEE Group Factory Environment
718 Inconel alloy factory

GNEE Group Product Test
Inconel 718 686 Thick wall Pipe test

FAQ
Q. What are your company's main products ?
A: Our main products are stainless steel , carbon steel , galvanized steel, aluminium products , etc.
Q. How do you control quality ?
A: Mill Test Certification is supplied with shipment, Third Party Inspection is available. and we also get ISO,SGS Verified.
Q.What is the difference between Inconel 625 and 718?
A:Alloy 625 is primarily nickel-based, while alloy 718 is nickel + cobalt (Ni+Co)-based. Alloy 625 has higher levels of chromium and molybdenum, making it more corrosion resistant.
Hot Tags: Inconel 718 686 Thick wall Pipe, China Inconel 718 686 Thick wall Pipe suppliers, Inconel Weld Neck Flanges, inconel alloy transmitter parts, inconel alloy cylinder parts, inconel alloy plug fittings, inconel alloy extrusion molding process, inconel alloy gasket fittings
Previous
Inconel 725 PipeYou Might Also Like
Send Inquiry















