686 718 Inconel Mirror polished Pipe
GNEE Group offers Nickel Alloy Inconel 718 686 in a variety of forms, including:
Bars
Wires
Sheets
Forgings
Tubes
Flanges
Seamless and Welded Pipes
Welding Rods
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of 686 718 inconel mirror polished pipe in China. If you're going to wholesale high quality 686 718 inconel mirror polished pipe made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
inconel Pipe Products Application
686 718 inconel metal pipe video
Inconel 686 is known to be suitable for the following applications:
Chemical Processing
Petrochemical processing
Marine Engineering
Acid Processing
Oil & Gas extraction
Pulp & Paper production
Pollution control
Waste treatment
Welding
inconel Material Specification
Inconel 686 Chemical Composition
| % | Ni | Cr | Mo | W | Ti | Fe | C | Mn | S | Si | P |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | Balance | 19 | 15 | 3 | 0.02 | – | – | – | – | – | – |
| Max | Balance | 23 | 17 | 4.4 | 0.25 | 1 | 0.01 | 0.75 | 0.02 | 0.08 | 0.04 |
Inconel 718 Pipes & Tubes Chemical Composition :
| Inconel | % | Ni | Cr | Fe | Mo | Nb | Co | C | Mn | Si | S | Cu | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 718 | Min. | 50 | 17 | balance | 2.8 | 4.75 | 0.2 | 0.7 | ||||||
| Max. | 55 | 21 | 3.3 | 5.5 | 1 | 0.08 | 0.35 | 0.35 | 0.01 | 0.3 | 0.8 | 1.15 |
Available Sizes Inconel 718 Pipes
| Types | Out diameter | Sizes | Length |
|---|---|---|---|
| NB Sizes (in stock) | .0035" ~ 8" | 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" | Cut to length |
| Inconel Seamless Tube (Custom Sizes) | 6.35 mm OD To 101.6 mm OD | As per requirement | Cut to length |
| Inconel Welded Tube (ERW Tube) (in Stock + Custom Sizes) | 6.35 mm OD To 152 mm OD | As per requirement | Cut to length |
Available Sizes And Specifications
| Inconel 686 available sizes and specifications | |
| Grade | Inconel 686 |
| Nickel plate | Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm |
| Nickel strip/ nickel foil | Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm |
| Nickel coil | Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm |
| Nickel pipe | Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm |
| Nickel Capillary Pipe | Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm |
| Nickel bar | Diameter: Ф4mm - Ф600mm |
| Nickel wire rod | Diameter:Ф0.01mm - Ф6mm |


Inconel alloy 686 is a single-phase, austenitic Ni-Cr-Mo-W alloy offering outstanding corrosion-resistance in a range of severe environments. Its high nickel (Ni) and molybdenum (Mo) provide good resistance in reducing conditions, and high chromium (Cr) offers resistance to oxidizing media. Molybdenum (Mo) and tungsten (W) aid resistance to localized corrosion such as pitting. Iron (Fe) is closely controlled to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected zones of welded joints. Resistance to general, pitting and crevice corrosion increases with the alloying (Cr+Mo+W) content, and INCONEL alloy 686 scores higher than competitive materials.
Its matched composition welding products, designated as INCO-WELD filler metals and welding electrode 686 CPT also offer exceptional as-welded resistance to sulfuric or hydrochloric acids, to mixtures of the two, and to crevice or pitting corrosion in hot concentrated acid chloride solutions. These welding products are also used for dissimilar and overmatched welding applications.
Alloy 686 is used for resistance to aggressive media in chemical processing, pollution control, pulp and paper manufacture, and waste management applications.
Inconel 718 alloy is a high-temperature alloy and a nickel-based alloy. It is composed of nickel, chromium, iron, molybdenum, aluminum, titanium and other elements. Inconel 718 alloy has excellent high-temperature strength, corrosion resistance and oxidation resistance, making it widely used in aerospace, energy, chemical and automotive fields.
GNEE Group Factory Environment
Inconel round tube factory

GNEE Group Product Packaging
inconel Mirror polished tube packing

Customer Case
customer visit


FAQ
Q: What is your delivery time?
A: Our delivery time is about one week, based on the number of customers.
Q: What does your factory do in terms of quality control?
A: We have obtained ISO, CE and other certifications. From materials to products, we check every process to maintain good quality.
Q: Can I get a sample before ordering?
A: Yes, of course. Usually our samples are free. We can produce according to your samples or technical drawings.
Q: About the product price of 686 718 inconel pipe?
A: Due to cyclical changes in raw material prices, prices vary in different periods.
Contact Us
Address
No.4-1114 Beichen Building, Beicang Town, Beicheng District, Tianjin City, China
Phone
+86-15824687445
ss@gneesteel.com
Skype
mmkelly1314
Whatsapp/Wechat
+86 15824687445
Hot Tags: 686 718 Inconel Mirror polished Pipe, China 686 718 Inconel Mirror polished Pipe suppliers, inconel seamless Piping, Inconel 825 Astm Standard, inconel alloy pump parts, inconel alloy engine parts, inconel alloy reaction injection molding process, inconel alloy injection molding process
You Might Also Like
Send Inquiry














