1.4482 1.4541 Stainless Steel Welded Pipe
video

1.4482 1.4541 Stainless Steel Welded Pipe

Sverdrup Steel SS LD24 is a low alloyed Lean Duplex stainless steel developed with increased Cr, Mo and N content to achieve a PRE of ≥24. The microstructure consists of a phase balance of approximately 50 % ferrite and 50 % austenite that provides much higher yield strength than AISI 304 and AISI 316. Also, it exhibits good formability and corrosion resistance.
Send Inquiry
Chat Now

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Product Introduction

Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of 1.4482 1.4541 stainless steel welded pipe in China. If you're going to wholesale high quality 1.4482 1.4541 stainless steel welded pipe made in China, welcome to get free sample from our factory. Good service and reasonable price are available.

 

1.4482 1.4541 Stainless Steel Welded Pipe

Classification of stainless steel pipes: stainless steel seamless steel pipes and stainless steel welded steel pipes (seamed steel pipes) are the two basic categories. According to the outer diameter shape of steel pipes, they can be divided into round pipes and special-shaped pipes. The most widely used are circular steel pipes, but there are also some special-shaped steel pipes such as square, rectangular, semicircular, hexagonal, equilateral triangle, and octagonal shapes.
For steel pipes that bear fluid pressure, hydraulic tests and radiographic inspections are required to check their pressure resistance and quality. If no leakage, soaking or expansion occurs under the specified pressure, they are qualified. Some steel pipes must also be tested according to standards or requirements of the purchaser. Hemming test, flaring test, flattening test, etc.
Seamless stainless steel pipes, also known as stainless steel seamless pipes, are made from steel ingots or solid tube blanks that are perforated into capillary tubes, and then hot rolled, cold rolled or cold drawn. The specifications of seamless steel pipes are expressed in terms of outer diameter * wall thickness in millimeters.

Applications

The main applications are for details with corrosion resistance better than 304L.

UNS S32001 is characterized by:
• Good resistance to stress corrosion cracking.
• Good resistance to general corrosion.
• High mechanical strength.
• High resistance to erosion corrosion and corrosion fatigue.

219 14

Hot Tags: 1.4482 1.4541 stainless steel welded pipe, China 1.4482 1.4541 stainless steel welded pipe suppliers, 1 4509 1 4510 Pipes And Tubes, SS410 Stainless Steel Pipe, 420J1 420J2 316 Stainless Pipe, 410 Stainless Steel Pipe, Slip On Flanges, Inconel 625 Alloy Steel Plate

Send Inquiry

whatsapp

Phone

E-mail

Inquiry