Alloy Inconel 600 601 Seamless Pipe
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of alloy inconel 600 601 seamless pipe in China. If you're going to wholesale high quality alloy inconel 600 601 seamless pipe made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
Nickel Inconel 600 601 Pipe Description
Both Inconel 600 Pipe and Inconel 601 Seamless Round Tube are nickel-chromium alloys used in high-temperature and corrosive environments, but there are distinct differences between them. While Inconel 600 is known for its high strength and resistance to stress corrosion cracking, Inconel 601 Alloy Pipe offers excellent oxidation resistance due to its higher chromium and aluminum content. Both Inconel 600 Seamless Pipe and 601 Alloy Pipe belong to the same nickel-chromium-iron alloy family, but there are some differences between them. In order to determine which alloy is best for a specific application, it is crucial to understand the differences between the two alloys in terms of composition, mechanical properties, and corrosion resistance. Let's take a deeper look.
GNEE STEEL GROUP supplies Alloy Inconel 600 601 Pipe for you
In what form does GNEE supply Inconel 600?
Plates
Plates
Rods
Tubes (welded and seamless)
Fittings
Elbows, tees, short ends, return pipes, caps, crossheads, reducers, fittings, etc.
Wire
| PRODUCT FORM | SIZE RANGE FROM | SIZE RANGE TO |
| Alloy 600 pipe | 0.5 in | 8 in |
| Alloy 600 tube | 12 mm | 260 mm |
| Alloy 600 pipe fittings | 0.5 in | 8 in |
| Alloy 600 flanges | 0.5 in | 8 in |
In what forms does GNEE offer Inconel 601?
Plates
Sheets
Bars
Tubes (welded and seamless)
Fittings
Elbows, tees, nipples, returns, caps, crossheads, reducers, fittings, etc.
Wire
| PRODUCT FORM | SIZE RANGE FROM | SIZE RANGE TO |
| Alloy 601 pipe | 0.5 in | 8 in |
| Alloy 601 tube | 12 mm | 260 mm |
| Alloy 601 pipe fittings | 0.5 in | 8 in |
| Alloy 601 flanges | 0.5 in | 8 in |
Corrosion Resistant Alloy 600 601 Pipe Specification
Inconel 600 Chemical composition
| Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
|---|---|---|---|---|---|---|---|
|
72.0 min |
14.0-17.0 |
6.0-10.0 |
.15 max |
1.00 max |
.015 max |
.50 max |
.50 max |
Inconel 601 Chemical composition
| Ni | Cr | Al | C | Mn | Si | Fe |
|---|---|---|---|---|---|---|
|
61.5 |
22.5 |
1.4 |
.05 |
.3 |
.2 |
14 |
Inconel 600 Melting Point, Density and Tensile Strength
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | |
|---|---|---|---|---|---|
| 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Inconel 601 pipe Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 601 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
Ni Alloy Inconel 600 601 Seamless Pipe Surface Treatments
Gnee Steel provides four surface treatments for Inconel 600 601 Seamless Pipe alloy seamless pipes: pickling, mirror polishing, polishing and sand blasting.
Ni 600 601 Seamless Pipe production process
Gnee Steel provides the following heat treatments for Ni 600 601 Seamless Pipe: Annealing, Solution + Aging. In addition, Gnee Steel also provides hot working and cold working, i.e. hot rolling and cold drawing.
nickel based Alloy 600 601 Seamless Pipe packing And Company Environment
nickel based Alloy 600 601 Seamless Pipe Testing And Company Environment
About Gnee Steel
Gnee Steel is a supplier of Inconel 600 601 metal Pipe, covering pipes: seamless pipes: size: 4 - 219 mm; thickness: 0.5 - 20 mm; welded pipes: size: 5.0 - 1219.2 mm; thickness: 0.5 - 20 mm, plates: plate thickness 0.1 to 100 mm; plate width 10-2500 mm, strips, alloy round bar size: diameter 3-800 mm;, flat bar size: thickness 2-100 mm; width: 10-500 mm, hexagonal bar size: 2-100 mm;, wire and extruded profiles. We work with steel mills to provide customers with 625 alloy, and its products meet or exceed many leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN and BS standards.
Gnee Steel stocks and sells Inconel 600 601 metal Pipe, Tube, Pipes, Plates, Strips, Plates, Round Bars, Flat Bars, Forged Billets, Hexagons, Wires and Extruded Profiles. Feel free to contact us for a quote at ss@gneesteel.com
Hot Tags: Alloy Inconel 600 601 Seamless Pipe, China Alloy Inconel 600 601 Seamless Pipe suppliers, inconel alloy decoder parts, inconel alloy gasket fittings, Inconel Alloy 706 Pipe, inconel alloy flange fittings, inconel alloy multiplexer parts, inconel alloy steel piping
You Might Also Like
Send Inquiry