Inconel 718 Condenser Heat Exchanger Tubes

Inconel 718 Condenser Heat Exchanger Tubes

Inconel 718 condenser heat exchanger tubes are nickel-based alloy tubes made from UNS N07718. They offer high mechanical strength, corrosion resistance and elevated-temperature performance for specialized heat transfer equipment. GNEE STEEL supplies customized Inconel 718 seamless tubes...
Send Inquiry
Chat Now

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Product Introduction

Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of inconel 718 condenser heat exchanger tubes in China. If you're going to wholesale high quality inconel 718 condenser heat exchanger tubes made in China, welcome to get free sample from our factory. Good service and reasonable price are available.

 

Inconel 718 condenser heat exchanger tubes are nickel-based alloy tubes made from UNS N07718. They offer high mechanical strength, corrosion resistance and elevated-temperature performance for specialized heat transfer equipment.

 

GNEE STEEL supplies customized Inconel 718 seamless tubes according to required dimensions, material specifications, heat treatment conditions and inspection requirements. AMS 5589H is the relevant seamless tubing specification for Inconel 718.

 

Inconel 718 Seamless Heat Exchanger Tube Specifications

 

Inconel 718 seamless tubes can be supplied in different outside diameters, wall thicknesses and lengths. The final dimensions should be selected according to equipment design, operating pressure, temperature and manufacturing feasibility.

 

Standard and Custom Tube Dimensions

Parameter Specification
Material Inconel 718 / UNS N07718
Product Form Seamless Tube
Applicable Standard AMS 5589H
Minimum Nominal OD in AMS 5589H Scope 3.18 mm (0.125 in)
Minimum Nominal Wall in AMS 5589H Scope 0.38 mm (0.015 in)
Outside Diameter Customized according to requirements
Wall Thickness Customized according to requirements
Length Straight lengths or cut-to-length
Manufacturing Process Seamless Tube Manufacturing
Heat Treatment Solution Heat Treated, as specified
Surface Condition Solution Treated, Descaled or Other Agreed Finish

 

Inconel 718 Tube Common Precision Tube Size References

 

The following sizes are inquiry references for precision tubing, not a guaranteed stock list or a complete AMS 5589H dimensional schedule.

 

Outside Diameter (mm) Outside Diameter (in) Wall Thickness (mm) Length
3.18 1/8 0.38–0.50 Custom
4.00 0.157 0.40–0.80 Custom
6.00 0.236 0.50–1.00 Custom
8.00 0.315 0.50–1.00 Custom
10.00 0.394 0.50–1.00 Custom
12.00 0.472 0.50–1.00 Custom
16.00 0.630 0.80–1.50 Custom

 

 Larger outside diameters and heavier walls should be evaluated separately according to production capability and the required specification.

 

Equivalent Grades Of Alloy 718 Seamless Tubing

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718 NCF 718 – – – –

 

Alloy 718 Heat Exchanger Tubes Chemical Compatibility

 

Grade C Mn Si S Cu Fe Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max – 50.00 – 55.00 17.00 – 21.00

 

Mechanical Properties of Inconel UNS N07718 Tubing

 

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

 

Inconel 718 Seamless Tube Dimensional Tolerances

 

Dimensional tolerances are important for condenser and heat exchanger tube installation. Outside diameter, wall thickness, ovality, straightness and length should be confirmed before production.

 

The following figures are indicative precision-tube reference tolerances, not mandatory AMS 5589H limits. Final acceptance tolerances must be agreed with the manufacturer and stated in the purchase order.

 

Inspection Item Indicative Tolerance
Outside Diameter ±0.03 mm
Inside Diameter ±0.03 mm, where specified
Wall Thickness ±10%
Length According to order requirements
Ovality To be agreed according to OD and wall thickness
Straightness To be agreed according to tube length
Surface Condition No unacceptable cracks, laps or surface defects

 

For tighter dimensional requirements, buyers should specify the target OD, ID, wall thickness and tolerances in their drawings. Precision-tube manufacturing capabilities may offer tighter tolerances depending on dimensions and production route.

 

Inconel 718 Tube Standards by Product Form

 

Different Inconel 718 product forms are covered by different ASTM and AMS specifications. Buyers should select the standard according to the actual product form and required delivery condition.

 

Product Form Common Standards Material / Product Description
Seamless Tube AMS 5589H 1775°F (968°C) solution heat treated
Seamless Tube AMS 5590 1950°F (1066°C) solution heat treated
Plate / Sheet / Strip AMS 5596 1775°F (968°C) solution heat treated
Plate / Sheet / Strip AMS 5597 1950°F (1066°C) solution heat treated
Plate / Sheet / Strip ASTM B670 Nickel alloy plate, sheet and strip
Round Bar / Rod AMS 5662 Solution heat treated
Round Bar / Rod AMS 5663 Solution and precipitation heat treated
Round Bar / Rod AMS 5664 1950°F (1066°C) solution heat treated
Bar / Forgings ASTM B637 Precipitation-hardening nickel alloy bars, forgings and forging stock
Welding Wire AMS 5832 Inconel 718 welding wire

 

Standard selection note: AMS 5589H and AMS 5590 cover seamless tubing under different solution heat treatment conditions. ASTM B670 is for flat products, while ASTM B637 is for bars and forgings. These specifications should not be used interchangeably.

 

ASTM B163 is a general condenser and heat exchanger tube specification for listed nickel alloys. UNS N07718 should not be ordered under ASTM B163 without explicit confirmation that the applicable specification covers the material grade.

 

Specific Application Components of Inconel 718 Condenser Heat Exchanger Tubes

 

U‑tube heat exchanger bundle: Core component of shell‑and‑tube heat exchangers. Formed by bending process, applied in aircraft lube oil coolers and oil & gas wellhead heat exchangers for isolating heat exchange between hot and cold media.

 

Condenser tube: Heat transfer tube inside condensers for oil & gas and petrochemical plants, exposed to sulfur‑containing acidic condensate media.

Fuel‑lube oil cooler tube: Heat exchanger component for aero‑engine auxiliary units, subject to vibration, pressure up to 200 bar and frequent thermal cycling.

 

Bleed air cooler tube: Heat exchange part for bleed‑air circuits of gas turbines and aero‑engines, with maximum operating temperature ranging from 650‑700 °C.

 

Cryogenic fuel heat exchanger tube: Low‑temperature heat exchange assembly for rocket engines, suitable for ultra‑low‑temperature heat‑exchange loops at ‑253 °C.

 

Regenerator heat exchanger tube: Heat‑exchange part for waste‑heat recovery regenerators of industrial micro gas turbines, serving for heat transfer between high‑temperature‑high‑pressure flue gas and process media.

 

Downhole wellhead heat exchanger tube: Heat‑exchange component for oil & gas downhole equipment, compliant with NACE MR0175 for sour oil‑gas service conditions.

 

Molten‑salt heat exchanger bundle: Internal tube component for concentrated solar power molten‑salt heat exchangers, enduring long‑term service in molten‑salt media at 550‑600 °C.

 

Reboiler heat exchanger tube: Tube fitted in reboilers of petrochemical distillation systems with acidic media, resistant to sulfidation and chloride‑ion corrosion from process fluids.

 

Hydraulic heat‑exchange capillary tube: Small‑size precision seamless heat‑exchange tube for aircraft hydraulic systems, cold‑drawn seamless tube with small bore.

 

Why Choose GNEE STEEL as Your Inconel 718 Heat Exchanger Tube Supplier?

 

At GNEE, Inconel 718 is available in various forms to meet diverse industrial needs:
Plates and Sheets (cold rolled and hot rolled)
Bars and Rods (round, square, hexagonal)
Tubes (seamless and welded)
Wires and Strips (for springs, fasteners, electrical applications)
Forgings and Custom Parts (according to drawings or specifications)
Specifications: UNS NO7718, WNR 2.4668, AFNOR NC19FeNb, JIS NCF 718, GOST ХН75МБТЮ, EURONORM NiCr22Mo9Nb, OR ЭИ602, BS NA 21.
Temperature Range: -423°F to 1300°F.
Testing and Documentation: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Testing Reports, Non-Destructive Testing Reports, PMI Test Reports, Visual Inspection Reports, Third-Party Inspection Reports, NABL Certified Laboratory Reports.
Packaging: Wooden crates, bubble wrap, steel strapping, or packaged according to customer requirements.

AMS 5662 vs 5663 vs 5664 | Inconel 718 Guide
Inconel 718 round bar
718 Nickel Alloy - Inconel 718 - AMS 5662 - UNS N07718
Inconel 718 round pipe
AMS 5662 vs 5663 vs 5664 | Inconel 718 Guide
Inconel 718 alloy plate
718 Nickel Alloy - Inconel 718 - AMS 5662 - UNS N07718
Inconel 718 Forged Ring

 

Request Quotation

 

Hot Tags: inconel 718 condenser heat exchanger tubes, China inconel 718 condenser heat exchanger tubes suppliers, 625LCF 693 Stainless Steel Pipe, inconel alloy elbow fittings, inconel alloy exhaust system parts, Inconel alloy material, inconel alloy mechanical parts, Inconel Tube 617 625

Send Inquiry

whatsapp

Phone

E-mail

Inquiry