600 Nickel Iron Alloy Tubing
GNEE Group offers Nickel Alloy Inconel 600 in a variety of forms, including:
Bars
Wires
Sheets
Forgings
Tubes
Flanges
Seamless and Welded Pipes
Welding Rods
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Gnee Super Alloy (Tianjin) Co., Ltd. is one of the most professional manufacturers and suppliers of 600 nickel iron alloy tubing in China. If you're going to wholesale high quality 600 nickel iron alloy tubing made in China, welcome to get free sample from our factory. Good service and reasonable price are available.
600 Nickel Iron Alloy Tubing introduce
600 Nickel Iron Alloy Tubing
Alloy 600 is a nickel-chromium-iron solid solution strengthened alloy with a nominal chemical composition of 72% nickel, 16% chromium, and 8% iron. It is commonly known by the trade name Inconel 600 and the generic name UNS N06600. Alloy 600 has good corrosion resistance in many media and excellent oxidation resistance at elevated temperatures.
Characteristics
Corrosion Resistance
Alloy 600 has outstanding corrosion resistance imparted by the dual corrosion fighting power of chromium and nickel. Chromium resists corrosion from oxidizing media while nickel defends against attack from many reducing agents. Alloy 600 exhibits good corrosion resistance in reducing acids, mildly oxidizing acids, high purity water, and other media. However, Alloy 600 is not suitable for strong oxidizing acids such as hot nitric acid. It is essentially immune to chloride stress corrosion cracking.
Elevated Temperature Resistance
Alloy 600 provides excellent oxidation resistance at temperatures up to 2150°F (1177°C). However, it is susceptible to sulfidation attack.
Inconel 600 Mechanical Properties
Alloy 600 can be provided in the lower strength, annealed condition, or strengthened through the pilger process. Alloy 600 maintains excellent toughness even in the higher strength conditions and maintains toughness at cryogenic temperatures.
Inconel 600 Heat Treatment
While Alloy 400 cannot be strengthened by heat treating, annealing or stress relieving are commonly used after hot working or cold working operations. Stress-relieving is conducted at 1400°F - 1600°F (760°C - 871°C). Stress-relieving is performed after cold working to reduce residual stress and prevent distortion. Annealing is performed at 1700°F - 1900°F (927°C - 1038°C) to restore full softness.
Workability
Alloy 600 has good hot and cold workability in the annealed condition. Hot-working should be done above 1600°F (871°C) to ensure adequate ductility, while cold work should be performed below 1200°F (649°C).
Chemical Composition Of Alloy 600 Tube
| Grade | Mn | C | S | Si | Fe | Ni | Cr | Cu | |
| Inconel 600 Pipes | minimum | – | – | – | – | 6.0 | 72.0 | 14.0 | – |
| maximum | 1.0 | 0.15 | 0.015 | 0.5 | 10.0 | – | 17.0 | 0.5 | |
GNEE Group Product Packaging
600 Nickel Iron Alloy Tubing
GNEE Group Factory Environment
600 Inconel metal polished tube
FAQ
1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2.what can you buy from us?
Seamless pipe,stainless steel,carbon steel,Square tube,Profile
3. why should you buy from us not from other suppliers?
GNEE Steel Co., Ltd. is an enterprise specializing in the production of high-quality steel pipes, mainly producing stainless steel, seamless pipes, carbon steel, galvanized, profiles, etc. it is a professional one-stop steel product supplier.
Hot Tags: 600 Nickel Iron Alloy Tubing, China 600 Nickel Iron Alloy Tubing suppliers, , , corrosion resistant material, inconel tube, high temperature corrosion resistant alloy
You Might Also Like
Send Inquiry